Powerplay Engines
Via the <strong>integrated datalog</strong> the measuring values can be stored on the humimeter RH5 paper moisture meter and additional data can be added. You also have the possibility to use the Autolog function. This function automatically saves measuring values in adjustable time intervals. Rocky Mountain Powerplay Drive
The Powerplay The drivetrain was developed by the Canadian company "Rocky Mountain Bicycles Ltd," which is primarily known for its high-quality mountain bikes. Founded in 1981, the company places particular emphasis on perfected frame geometry, which is intended to ensure outstanding handling.
With the “Altitude Powerplay“ presented Rocky Mountain in 2017, a first e-mountain bike that combines the excellent riding characteristics of the “Rocky Mountain Altitude” MTBs, but also with the self-developed “Powerplay“ engine. The reinforced engine housing was integrated directly into the frame, which ensures increased rigidity. Since the “Altitude Powerplay“ has the same geometry and suspension performance as the legendary “Altitude”, it is - according to the manufacturer - the first E-MTB that rides like a normal mountain bike.
Powerplay E bike engine
The of Rocky Mountain - developed from scratch - Powerplay The drive unit boasts a powerful yet compact motor. It's a highly efficient, brushless three-phase motor. The company placed great emphasis on the best possible power transmission and optimal torque, high battery capacity, and quiet operation while maintaining a low weight. The peak power is just over 700 W. The low-mounted Powerplay The engine ensures a low center of gravity, which ensures optimal handling and enables a compact design. One advantage of the Powerplay The motor provides minimal resistance when the motor is switched off or when maximum power is exceeded. The system offers three support levels and a "Walk" mode.
Can he Rocky Mountain Powerplay Engine be optimized?
Yes! The number of tuning solutions is manageable, but with the brand new “MountainTuning“ Tool (MTT) can Powerplay Engines can be optimized in many ways. In addition, the MTT can be used instead of the Powerplay Controller – this has the advantage that the current speed is shown on the display (the Powerplay The control element has no display).
What kind of Rocky Mountain Powerplay Are there tuning tools?
"MountainTuning“ Tool (MTT)
This tuning tool for E-MTBs with Rocky Mountain Altitude Powerplay Drivetrains are truly impressive. In fact, there's currently no other e-bike tuning tool that offers so many optimization options: Not only can you individually adjust the maximum motor support level, but you can even increase the current from 20 to 22 A – that's about 10 percent more power! The tuning tool increases the motor's peak power from just over 960 W to more than 1056 W. The wheel circumference can also be precisely adjusted. Another PlusThe advantage of the MTT is that the tool can also be used as a display to show the current speed on the go – the Altitude Powerplay The system does not have a real display. Mountain Tuning By the way, don't leave the tool on the e-bike – once you've optimized the bike, you can simply remove the tool. Conclusion: For riders of Rocky Mountain Altitude Powerplay For e-bikes, the MTT is a MUST!
Mountain Tuning Module for Rocky Mountain Dyname 3.0
A practical plug-in solution for e-bikes with Rocky Mountain Powerplay Motors. After installation, the 25 km/h speed limit is lifted. The tool is programmable to a certain extent, without a PC or smartphone. This allows tuning to be switched on and off; moreover, the maximum assisted speed can be increased in stages to a desired value. There are no other functions. The device requires its own battery. Mountain Tuning The plugin doesn't work. The speed display isn't correct when tuning is enabled (assuming there's a display at all).
MTT 4.0: Mountain Tuning for Rocky Mountain Powerplay Dyname 4.0
This tuning tool lifts the 25 km/h speed limit of Rocky Mountain Powerplay E-bikes with Dyname 4.0 motors. This enables much faster riding with full motor support. The MTT 4.0 is a module that must be inserted into the top tube and connected between the motor and the display. There's no need to open the motor. After installation, the tuning module is always active as soon as the e-bike is switched on (speed limit removed). Despite tuning, the e-bike display continues to show correct values. The MTT 4.0 module does not require its own battery.
