Ananda

Ananda is an Asian company that specializes in high-quality, innovative motors that are used in a wide variety of e-bike types – from city e-bikes to e-mountain bikes. There are now probably over half a million e-bikes with Ananda engines are on the roads, although the brand is (still) relatively unknown. This is simply because many Ananda Motors are sold as "white label" products – this means that the motors are installed by different e-bike brands and then released onto the market under the respective brand name. The motors are individually adaptable and can therefore be combined with a wide variety of e-bike brands and models.

Here you will find a selection of tuning tools with which you Ananda You can optimize e-bike motors. The main focus is on removing the 25 km/h speed limit, which allows for significantly faster riding with full motor support.

SHOW FILTERS
MBIQ-P for Ananda M81 & Momas & Comfort Drive V2
New
Pre-order
Sold Out

PRODUCT TYPE: Ananda

BRAND: MBIQ

MBIQ-P for Ananda & Mom's & AEG Comfort Drive V2 A tuning chip for various ANANDA (M60 / M81 / M100 / M230 / M1000 / M4000 / M5000 / M6100) and MOMAS (Ultra 70 / 80 / 110 Ultralight, Pro, Turbo...

€ 134,90
€ 134,90
MTT HubForce One: Conversion kit for Zündapp Z8xx (Ananda M145)
New
Pre-order
Sold Out

PRODUCT TYPE: Ananda

BRAND: MountainTuning

MTT HubForce One: Conversion kit for Ananda M145 (Zündapp: Z808, Z810 and Z898) With the conversion kit MTT HubForce One (by MountaunTuning) you get a tuning package that packs a punch. From now on, you can use the hand throttle on the display to propel your e-MTB over 25 km/h...

€ 199,00
€ 199,00
MTT HubForce Two: Conversion kit for AEG EasyDrive+ (Ananda M213)
New
Pre-order
Sold Out

PRODUCT TYPE: Ananda

BRAND: MountainTuning

MTT HubForce Two: Conversion kit for AEG EasyDrive+ (Ananda M213) With the conversion kit MTT HubForce Two (by MountaunTuning) you get a tuning package that packs a punch. From now on, you can propel your e-MTB over 25 km/h (maximum...) with the hand throttle on the display.

€ 199,00
€ 199,00
MBIQ-S Ebike Tuning for ANANDA mid-engines
New
Pre-order
Sold Out

PRODUCT TYPE: Ananda

BRAND: MBIQ

MBIQ-S Ebike Tuning for ANANDA Mid-Drive Motors A microcontroller-based tuning tool for e-bikes with ANANDA mid-drive motors that completely removes the 25 km/h speed limit. The tool comes as a ready-made sensor solution that simply replaces the existing speed sensor. As a result,...

€ 134,90
€ 134,90
Eplus Tuning Chip MINI for Ananda M60, M81 & M100
New
-27%
Pre-order
Sold Out

PRODUCT TYPE: Ananda

BRAND: Eplus

Eplus Tuning Chip MINI for Ananda M60, M81 & M100 This affordable tuning chip removes the 25 km/h speed limit on your e-bike, allowing you to ride much faster with full motor support. There are no other features. In this case...

€ 149,00€ 109,00
€ 149,00€ 109,00
OUTLET: Electronic radio pliers, polished & dip-insulated
New
-26%
Pre-order
Sold Out

PRODUCT TYPE: Tools

BRAND: Format

Radio pliers: These radio pliers (160 mm) are ideal for professionally unplugging and replugging connectors in the engine compartment of your e-bike. Application: For gripping and cutting work in precision mechanics. Design: DIN ISO 5745. The radio pliers are oil-hardened and tempered. Polished head, flat-round,...

€ 7,90€ 5,90
€ 7,90€ 5,90
OUTLET: Electronic needle-nose pliers, curved
New
-34%
Pre-order
Sold Out

PRODUCT TYPE: Tools

BRAND: Format

Electronics needle-nose pliers, curved. These electronics needle-nose pliers are ideal for professionally unplugging and replugging plugs in the engine compartment of your e-bike. Application: For gripping and cutting work in precision mechanics. • Polished head • Special tool steel • Plastic-coated handles • Opening spring • Self-service hanger  

€ 8,90€ 5,90
€ 8,90€ 5,90
Promotion: Crank puller for e-bike motors (with a tuning product)
New
Pre-order
Sold Out

PRODUCT TYPE: Tools

BRAND: M Wave

Crank puller for Bosch or other e-bike motors for removing the crank. This crank puller (SHIMANO Octalink, ISIS, and square drive) is ideal for e-bike motors and can be operated with an open-end wrench. Note: Only available in conjunction with a tuning module. Otherwise, please see...

€ 5,90
€ 5,90
Crank puller for e-bike motors - Cyclus
New
Pre-order
Sold Out

PRODUCT TYPE: Tools

BRAND: Cyclus

Crank puller for Bosch or other e-bike motors for removing the crank. The crank puller (SHIMANO Octalink, ISIS) is ideal for e-bike motors and can be operated with a 22 mm open-end wrench. The crank puller (SHIMANO Octalink (BB-7700/6500/5500)) can be used for Bosch, Yamaha, and other e-bike motors....

€ 8,90
€ 8,90
XLC crank puller
New
Pre-order
Sold Out

PRODUCT TYPE: Tools

BRAND: XLC

XLC Crank Puller TO-S02 – suitable for many e-bikes. A special tool for removing the cranks on e-bikes and bicycles. Thanks to the XLC crank puller, maintenance work on your e-bike is greatly simplified, as the crank arms can be removed easily and...

€ 14,90
€ 14,90
Promotion: Finn smartphone holder (with a tuning product)
New
-34%
Pre-order
Sold Out

PRODUCT TYPE: brackets

BRAND: Finn

Special offer: Finn smartphone mount in black for e-bikes, e-scooters, and bicycles (with a tuning product). Please note: This product is only available in conjunction with a tuning product. Finn is an ingeniously simple smartphone mount for your e-bike, bicycle, or e-scooter.

€ 15,00€ 9,90
€ 15,00€ 9,90
Finn: Smartphone holder
New
-8%
Pre-order
Sold Out

PRODUCT TYPE: brackets

BRAND: Finn

Finn Smartphone Mount in Black for Pedelecs, E-Bikes, E-Scooters & Bicycles. Finn is an ingeniously simple smartphone mount for your e-bike/bicycle or e-scooter. Attach your smartphone directly to the handlebars so you always have it in view while riding...

€ 15,00€ 13,90
€ 15,00€ 13,90
The preloader