Jum-Ped – Programming device for Bosch Classic, BionX and Neodrives / Xion Tuning Systems

The JUM-Ped VMax Remover Tool is an excellent tool that allows you to remove the speed limit of e-bikes with BionX drive, Bosch Classic Motor or Neodrives / Xion Motor can be easily adjusted, canceled, or even reset (depending on the e-bike motor) at the touch of a button. But see for yourself:

1) The JUM-Ped for BionX drives:

E-bike tuning with the JUM-Ped VMax Remover is incredibly easy and can be installed in seconds – no PC or technical knowledge is required. Simply remove the heat shrink tubing from the original connectors (near the handlebar console) and unplug the connector from the bike. Then simply JUM-Ped Connect it to the BionX e-bike's power supply and turn on the BionX console. Now you can start adjusting the speed of the BionX system!

The JUM-Ped It features a clear LCD display; it is operated intuitively via four buttons. You now have the option of either selecting the desired speed from the menu or entering a custom value from 4 km/h upwards (please note that the actual achievable maximum speed depends, among other things, on the performance of the system used). The speed limit is removed. If your e-bike has a throttle, you can also enter a custom value for the maximum speed. You can find further setting options in the product description.

Important note: The Jum-Ped is limited to one BionX system, meaning you can optimize a maximum of one e-bike with it. However, you can make changes to this bike as often as you like.

2) The JUM-Ped for BionX RC Controller:

In the meantime we also have the JUM-Ped VMax Remover is specifically designed for BionX e-bikes with the RC3 controller (suitable for bikes with or without a DS3 display). This tool is also incredibly easy to use, and tuning can be completed in just a few seconds – no PC or basic technical knowledge is required!

The JUM-Ped It features a clear LCD display; it is intuitively operated via four buttons. After connecting the device, you can easily override the 4 km/h speed limit with the simple push of a button (the JUM-Ped will not remain on the vehicle afterward). You can find further setting options in the product description.

Important note: Each JUM-Ped is limited to 1 BionX system.

3) The JUM-Ped for Bosch Classic Line Engines:

The JUM-Ped for Bosch Classic Line EnginesDepending on the display, you can JUM-Ped with Intuvia connector or a JUM-Ped with HMI connector With the JUM-Ped, you can not only unlock the speed limit (VMax Remover function), but also make various other modifications to your Bosch Classic e-bike: For example, activate or deactivate the bike light, set the display in kilometers or miles, read and precisely set the wheel circumference (between 500 and 4000mm), activate or deactivate the starting aid (only with the Intuvia display) - or select the desired display language: German, English, Dutch, Danish, French, Italian, or Spanish (only with the Intuvia display). So you have a powerful tool at your disposal!

The JUM-Ped It also has a clear LCD display; operation is intuitive via 4 buttons. How to use the JUM-Ped for Bosch Classic Line You can find out how to install motors and make other adjustments in the product description.

Important note: The JUM-Ped The tool is also limited to one Bosch system, so you can only really speed up one Bosch Classic e-bike at a time with the tuning tool. If you want to subsequently optimize another Bosch Classic bike, you must first unpair the paired JUM-Ped.

4) The JUM-Ped for Neodrives and Xion engines:

The JUM-Ped for Neodrives and Xion engines is a convenient software tuning product. The maximum speed can be set from 15 – 37 km/h (depending on the manufacturer's software version, only 32 km/h may be possible). The walking assistance can be set from 1 – 11 km/h (depending on the manufacturer's software version, only a maximum of 6 km/h may be possible). The support levels can be individually adjusted from 1 to 5 (50 – 300%). In addition, you can set the default support level after starting. The agility can also be set from 1-4 (response behavior). The wheel circumference can also be adjusted to the millimeter. There are many other features. Of course, you can JUM-Ped for Neodrives and Xion engines restore the original configuration if necessary!

Important note: The JUM-Ped Tool is on 1 Neodrives / Xion system limited – you can only optimize 1 bike at a time with the tuning tool.

JUM-Ped for Bosch Classic engines:

Tuning tool for Bosch Classic Line Motors with Intuvia display

Tuning tool for Bosch Classic Line Motors with HMI display

JUM-Ped for BionX motors:

Vmax Remover for BionX RC3/DS3

Vmax Remover for BionX

Vmax Remover for BionX (battery version)

Vmax Remover for BionX 2-series license

JUM-Ped for Neodrives and Xion engines:

JUM-Ped for Neodrives & Xion engines

JUM-Ped for Bosch Line Classic Engines

JUM-Ped for BionX motors

JUM-Ped for Neodrives and Xion engines