SpeedBox

SpeedBox - Tuning modules for many e-bike engines

Under the brand name SpeedBox Tuning modules are offered for e-bikes from a wide range of manufacturers - e.g. for models from Bosch, Yamaha, Shimano, Brose, Panasonic and Bafang. The SpeedBox from the Czech company EBike Electronic. These processor-controlled tuning tools increase the maximum motor support of the respective e-bikes. SpeedBox 1.0, however, has the small disadvantage that the e-bike display only shows half of the actual speed when tuned. This problem is not resolved with the new SpeedBox 3.0 (and SpeedBox 2.0) – with these tuning tools, most values are displayed correctly (current speed, range, daily distance, maximum and average speed, etc.). SpeedBox 2.0 can be conveniently switched on or off using the e-bike's control buttons (depending on the drive system, via the walk or light button). SpeedBox 3.0 for Bosch Gen4 engines, the maximum speed can even be set to an individually selected value. SpeedBox "B" products can also be combined with an app, which significantly expands the range of functions.
The installation of all SpeedBox Tuning devices are connected via the original connectors, whereby accidental misconnection is practically impossible thanks to the form-fitting connectors. SpeedBox Modules can be easily installed by the user, and no diagnostics are required during installation. According to the manufacturer, SpeedBox Tuning Tools uses only high-quality electrical components from world-renowned manufacturers. The microcomputer that SpeedBox controlled, was even originally certified for the automotive industry!
IMPORTANT: The manufacturer advises against performing software updates on any e-bikes.
1) SpeedBox App
For all B-Tuning modules with Bluetooth chip, the SpeedBox Smartphone app can be used.


2) SpeedBox Tuning Overview
SpeedBox Products are offered in several model series. The model series is identified by the number SpeedBox Module.
SpeedBox 3.x: The series SpeedBox 3.x unlocks the speed limit of 25 km/h, displays the correct speed and at the same time allows the maximum speed to be set as desired.
SpeedBox 2.x: The models SpeedBox 2.x offer the lifting of the speed limit and show the correct speed.
SpeedBox 1.x: The series SpeedBox 1.x Allows easy unlocking of the speed limit. The shared speed is displayed (sometimes frozen values are also displayed).
SpeedBox B.Tuning: An extension is the B.Tuning with Bluetooth, which is designed to connect the electric bike with a smartphone. SpeedBox A Bluetooth chip is integrated into the module. Thanks to the SpeedBox The app keeps you one step ahead with your e-bike. The app also includes additional features.
3) SpeedBox Tuning comparison
| SpeedBox 3.x B.Tuning |
SpeedBox 2.x B.Tuning |
SpeedBox 3.x |
SpeedBox 2.x |
SpeedBox 1.x |
|
|---|---|---|---|---|---|
| Removal of the speed limit | Ja | Ja | Ja | Ja | JA |
| The display shows the current values | Ja | Ja | Ja | Ja | |
| Speed limiter setting | Ja | Ja | |||
| Motor lock | Ja | Ja | |||
| Possibility to hide the tuning | Ja | Ja | |||
| Analysis of engine and driving data | Ja | Ja | |||
| Supported engines | Bosch (incl. 4th generation), Flyon, Giant, Yamaha, Oli | Bosch (including 4th generation) | Bosch (incl. 4th generation), Flyon, Giant, Yamaha, Oli | Bosch (incl. 4th generation), Yamaha, Giant | Bosch Smart System, Shimano, Panasonic, Brose, Bafang, Impulse |
4) SpeedBox Models
4.1) SpeedBox 3.x B.Tuning for Bosch (incl. 4th generation), Flyon, Giant, Yamaha, Oli

Features
- Speed limiter setting
- The display shows the current values
- Compatible with the SpeedBox App
Supported engines
SpeedBox 3.0 B.Tuning for Bosch (with Bluetooth / smartphone app)
SpeedBox 3.0 B.Tuning for Bosch (with Bluetooth / Smartphone App) with crank puller
SpeedBox 3.0 B.Tuning for Flyon
SpeedBox 3.1 B.Tuning for Giant (RideControl Go)
SpeedBox 3.0 B.Tuning for Giant without RideControl Go
SpeedBox 3.2 B.Tuning for Yamaha PW-X / PW-SE / PW-TE / PW-X2 / PW-ST
SpeedBox 3.3 B.Tuning for Yamaha PW-X3 / PW-S2 / PW-XM / Moro 07 / YDX-Moro 05
SpeedBox 3.4 B.Tuning for Yamaha Crosscore RC & Wabash
SpeedBox 3.1 B.Tuning for Yamaha PW-X3, PW-S2
SpeedBox 3.0 B.Tuning for Yamaha PW-SE, PW-X, PW-TE, PW-X2, PW-ST
SpeedBox 3.0 B.Tuning for Specialized
SpeedBox 3.0 B.Tuning for Brose
SpeedBox 3.2 B.Tuning for Bafang M200 / M410 / M500 / M510
SpeedBox 3.1 B.Tuning for Bafang M300, M400 & M420 (4-pin connector)
SpeedBox 3.0 B.Tuning for Bafang M300 / M400 (3-pin connector)
4.2) SpeedBox 2.x B.Tuning for Bosch

Features
- Removal of the speed limit
- The display shows the current values
- Compatible with the SpeedBox App
Supported engines
4.3) SpeedBox 1.x B.Tuning for Bosch (Smart System), Bafang, Shimano

Features
- With speed limit setting
- The display shows the current values
- Compatible with the SpeedBox App
Supported engines
- SpeedBox 1.1 B.Tuning for Bosch Smart System (BES3)
- SpeedBox 1.2 B.Tuning for Bosch Smart System (BES3) with rim magnet
- SpeedBox 1.0 B.Tuning for Bosch Gen4 Smart System 2022 (BES3)
- SpeedBox 1.0 B.Tuning for Bosch Gen4 Smart System 2022 (BES3) with crank puller
- SpeedBox 1.0 B.Tuning for Bosch Gen4 Smart System 2022 (BES3) with crank puller and FINN smartphone holder
- SpeedBox 1.2 B.Tuning for Shimano E8000, E7000, E6100, E5000 (with app)
- SpeedBox 1.2 B.Tuning for Shimano E8000, E7000, E6100, E5000 + E-Tube Port (with app)
- SpeedBox 1.3 B.Tuning for Shimano EP8 (with app)
- SpeedBox 1.3 B.Tuning for Shimano EP8 “+E-Tube Port”
4.4) SpeedBox 3.x for Bosch (incl. 4th generation), Flyon, Giant, Yamaha, Oli, Bafang, Specialized

Features
- With speed limit setting
- The display shows the current values
Supported engines
SpeedBox 3.0 for Bosch with crank puller
SpeedBox 3.1 for Giant (RideControl Go)
SpeedBox 3.2 for Yamaha PW-X / PW-SE / PW-TE / PW-X2 / PW-ST
SpeedBox 3.3 for Yamaha PW-X3 / PW-S2 / PW-XM / Moro 07 / YDX-Moro 05
SpeedBox 3.4 for Yamaha Crosscore RC & Wabash
SpeedBox 3.1 for Yamaha PW-X3, PW-S2
SpeedBox 3.0 for Yamaha PW-SE, PW-X, PW-TE, PW-X2, PW-ST
SpeedBox 3.2 for Bafang M200 / M410 / M500 / M510
SpeedBox 3.1 for Bafang M300, M400 & M420 (4-pin connector)
SpeedBox 3.0 for Bafang M300 / M400 (3-pin connector)
4.5) SpeedBox 2.x for Bosch, Yamaha, Giant

Features
- Removal of the speed limit
- The display shows the current values
Supported engines
- SpeedBox 2.0 for Bosch
- SpeedBox 2.0 for Yamaha PW
- SpeedBox 2.0 for Yamaha PW-SE with Display X
- SpeedBox 2.0 for Yamaha PW-X, PW-SE, PW-X2, PW-ST, PW-TE
- SpeedBox 2.2 for Giant (RideControl Go)
- SpeedBox 2.1 for Giant
- SpeedBox 2.0 for Giant for SyncDrive Life / Sport / Pro
4.6) SpeedBox 1.x for Bosch, Shimano, Panasonic, Brose, Bafang, Impulse

Features
- Removal of the speed limit
Supported engines
- SpeedBox 1.1 for Bosch Smart System (BES3)
- SpeedBox 1.2 for Bosch Smart System (BES3) with rim magnet
- SpeedBox 1.0 for Bosch Gen4 Smart System 2022 (BES3)
- SpeedBox 1.0 for Bosch Gen4 Smart System 2022 (BES3) with crank puller
- SpeedBox 1.2 for Shimano E8000, E7000, E6100, E5000
- SpeedBox 1.2 for Shimano E8000, E7000, E6100, E5000 +E-Tube Port
- SpeedBox 1.3 for Shimano EP8
- SpeedBox 1.3 for Shimano EP8 “+E-Tube Port”
- SpeedBox 1.0 for Shimano E8000, E7000, E6100 & E5000
- SpeedBox 1.1 for Shimano EP-8
- SpeedBox 1.0 for Shimano E6000
- SpeedBox 1.3 for Bafang Max Drive M300, M400, M420 (4-pin connector)
- SpeedBox 1.2 for Bafang Max Drive M300, M400 (3-pin connector)
- SpeedBox 1.1 for Bafang
- SpeedBox 1.0 for Impulse 2.0
- SpeedBox 1.0 for Impulse EVO RS
- SpeedBox 1.0 for Giant 2015 / 2016
- SpeedBox 1.0 for Brose
- SpeedBox 1.0 for Brose Specialized "+ plug" (for Brose Specialized, Brose S-MAG, Brose S, Brose T, Brose C, Brose T-ALU)
SpeedBox 1.0 for Brose Specialized SL "+ cut cable" (especially for Specialized SL) - SpeedBox 1.0 for Panasonic (GX series)
4.7) SpeedBox B.Cyclo for all bikes

Features
- Bluetooth bike computer
- Wireless
- Rechargeable battery
- Our SpeedBox App compatible
- Save tour
- Kilometer and time statistics
- Energy-independent storage
Supported bicycles

