Badass Box 4 for Panasonic 2020
AVAILABILITY: In stock
PRODUCT TYPE: Panasonic
BRAND: Badass Box
You save: €5,00 (4%)
Badass Box 4 for Panasonic 2020 e-bikes
Attention: Please compare your e-bike's speed sensor with the image above! Only the speed sensor in the middle is compatible.
For the pin-shaped sensor (left) you need the Badass Box 4 Panasonic CS Set, and for the normal Panasonic sensor (right) you need the Badass Box 4Panasonic.
Finally, the popular Badass Box Also for Panasonic 2020 e-bike motors. With this proven tuning tool, you can remove the 25 km/h speed limit of your Panasonic drive in no time.
You can Badass Box 4 by simply attaching the box and slightly repositioning the existing spoke magnet. If you want to undo the tuning and restore the e-bike's original handling characteristics, simply remove the box and move the spoke magnet to its original position. This can be done in seconds.
This is the Badass Box 4 is the best version of this proven tuning tool ever. New features include a redesigned housing and a patented snap lock, which allows for even faster attachment and removal. The range of the Badass Box has been increased: Thanks to the included 1,5V AAA battery, it is now over 7.000 km (or 1 year due to battery discharge). The battery can of course be easily replaced (without tools). Replacement batteries are available almost everywhere at low cost. For even better protection against moisture and mechanical stress, the electronics of the Badass Box now additionally glued into the housing with a special casting compound and completely sealed.
Badass 4 for Panasonic How it works:
Once installed, the badass box transmits a modified signal from the speed sensor, overriding the factory 25 km/h speed limit. This occurs contactlessly, meaning there's no electrical connection to the engine—there's no interference with the engine electronics or software. Thus, there's no risk of engine damage.
Please note that when tuning is activated, the current tempo and derived values are no longer displayed correctly.
The Badass Box is a quality product manufactured and developed in Germany.
Compatibility:
- All e-bikes with Panasonic mid-engines
- Compatible speed sensor see image above.
Delivery:
- Badass Box 4 Panasonic 2020 + body cover
- AAA battery
- Spoke magnet with lobe screw
Technical data:
- Dimensions: 28 x 59 x 31 mm
- Weight: Badass Box 20g (32g with battery)
- Battery: 1,5V AAA battery (IEC R03)
Badass Box 4 Panasonic Assembly:
The installation of the Badass Box 4 is quite simple. Compared to some other e-bike tuning tools, for example, there's no need to open the motor during installation.
The Badass Box 4 simply needs to be pulled over the Panasonic speed sensor next to the rear wheel. Once the snap lock clicks into place, the box is securely attached to the sensor.
During initial installation, it is recommended to replace the spoke magnet screw with the supplied tool-free tab screw for tool-free relocation. Badass Box Once the sensor has been placed on the spoke magnet, it only needs to be moved towards the edge of the housing in the direction of the snap lock – and the process is complete!
Once you have removed the box again, all you have to do is return the spoke magnet to its original position.
Comparison of e-bike tuning products:
| JUM-Ped | Mountain Tuning | Badass Box | RedPed | VOLspeed | PearTune | SpeedBox | MBIQ | sIMPLEk | Sx2 dongle | |
| Art | Software |
Software |
Box | module | module | module | module |
module / Sensor |
module / Dongle |
Dongle |
| Features | ***** | ***** | * | ***** | **** | *** | *** | *** | *** / ** | * |
| Easy installation | ***** | ***** | **** | ** | ** | ** | ** | ** / * | ** / * | * |
| Invisible after installation | ***** | ***** | * | ***** | ***** | ***** | ***** | ***** | ***** / **** | **** |
| Switch on / off while driving |
* Gerät |
***** Gerät, Display |
* Essay |
***** App, Display |
***** Display |
***** Display |
***** (App), Display |
*** Display, Magnet |
***** / **** Display / Plug |
**** Plug |
| No more tuning on the bike | ***** | ***** | ***** | * | * | * | * | * | * / **** | **** |
| Invisible dismantling | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** / *** | *** |
| Easy dismantling | ***** | ***** | ***** | ** | ** | ** | ** | ** / * | ** / * | * |
| Display correct km/h |
***** Display |
***** Display |
* |
***** Display, App |
***** Display |
***** Display |
***** Display, App |
* |
**** Display |
* |
| Dethrottling | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** |
| Thrushes | * | ***** | * | ***** | ***** | ***** | ***** | * | * | * |
| price in euro |
169 to 249 |
189 – 349 | 139 – 164 |
219 to 239 |
159 – 219 |
139 to 259 |
139 to 349 |
89 to 199 |
89 to 219 |
139 to 159 |
Tools
To install an E-Bike tuning chip in your E-Bike it is sometimes special tools necessary. Please check previously whether you have to open the engine compartment to access the motor connectors. This is especially true for products from the Modules, Kit, Dongle and Sensor.
Normally (but not always) opening the engine compartment requires loosening the crank. To do this, you will need a Crank puller. Some engines also have a Spider Tool This is important for opening the lock ring on the chainring - because the chainring must be loosened here so that the motor cover can be removed to access the inside of the motor. If you want to replace the chainring (wear, change the gear ratio), you often need a Spider Tool. The necessary special tools can also be found in our shop. To remove the engine cover, you usually need a Torx or Allen key. For installing the modules, appropriate Pliers from the electronics sector.
Do you decide not for a tuning solution that you have to install in the engine compartment (Box, Software), there is no need for any tools. In our Guide you will find further tips.
The EBikeTuningShop and the EBikeTuningBlog We'll keep you regularly informed about the latest e-bike tuning and e-scooter tuning products and solutions. You can sign up for our free newsletter here:
warnings
Important information on tuning measures for e-bikes and e-scooters
We expressly point out that any modification to e-bikes and e-scooters – whether through hardware tuning (e.g. tuning chips, dongles, sensor adapters) or software tuning (e.g. apps, programs or USB tools) – can have consequences.
Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads as defined by the StVZO (Road Traffic Licensing Regulations). Legal use is therefore only possible on private property or - if permitted - in competitions. Riding an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license (Section 21 of the Road Traffic Act) and driving without insurance (Section 6 of the PflVG). Tuning measures on e-bikes can lead to the loss of warranty rights and manufacturer guarantees. Furthermore, tuning measures can lead to the loss of insurance coverage and benefits from accident victim assistance in the event of an accident. The e-bike (or e-scooter) modified by tuning measures is subject to additional stress due to the higher speed, which can lead to safety risks.
Delivery time, shipping costs, minimum order value and payment methods:
Delivery time:
Delivery takes 1-3 business days within Germany. In exceptional cases, it can take up to 8 business days. Delivery times outside Germany may take longer. Please understand that due to high demand, some products may experience longer delivery times.
Delivery area:
We deliver to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.
For customers from Switzerland: For deliveries to Switzerland we recommend here a separate service.
Shipping:
Shipping costs for Germany are €4,90; shipping is waived for orders over €180. For countries within the EU, shipping costs are €12,90; shipping is waived for orders over €2.000. We currently do not ship to countries outside the EU. We also do not ship to the USA, France, or Canada (including any overseas territories). We ask that you bear the costs of any return shipments yourself. Please note that customs duties may apply in countries outside the European Union.
Minimum order value:
The minimum order value is €25. Only above this amount are advance payment, PayPal, and bank transfer available as payment methods.
Maximum order value:
The maximum order value for orders outside the EU is €1.000. The maximum order value within the EU is €12.500.
Payment in advance via bank transfer:
Please transfer the total amount, including your order number, to our account, which was communicated to you in the confirmation email. Please note that transfers within Germany can take up to three business days. Transfers from abroad, especially from Austria, usually reach us very quickly. Transfers from other countries can take slightly longer on average.
Payment in advance via Paypal:
At the end of the ordering process, you will be redirected to the PayPal page. There you can initiate your payment. Once the PayPal transaction is complete, your order status will change in the shop. The goods will then be shipped as soon as possible.
