A tuning kit specifically for Shimano e-bikes that feature the Shimano SM-DUE10 sensor integrated into the dropout (see compatible sensor below). The kit includes the "Badass Box 4 Shimano 2019" - a tuning tool that completely removes the 25 km/h speed limit of Shimano e-bike mid-drive motors. This allows you to ride much faster with 100% motor support. This tuning tool doesn't have any additional features – its functionality is reduced to the absolute essentials. All parts required for installing the tuning are included in the set. Note: When tuning is active, the e-bike display will no longer show the correct speed.
Please keep in mind:
Installing this tuning tool requires a few minor modifications, so it requires a bit of technical skill. For example, the rear wheel must be removed to access the Shimano sensor in the dropout. This is necessary so that the Shimano sensor can be screwed onto the included universal adapter and attached to the chainstay.
Therefore, please be sure to read the installation instructions below before you decide to order the tuning kit!
Legal status can be restored
After the universal adapter with the screwed-on Shimano sensor has been attached to the chainstay using the supplied cable ties, you can switch on the tuning by Badass Box onto the adapter. After that, you only have to attach the spoke magnet to the housing of the Badass Box The tuning is now active. By disassembling the e-bike, its legal condition can be restored at any time.
More robust than ever before
The electrics of the Badass Box 4 Shimano 2019 is glued and sealed into the housing with a special casting compound from the automotive industry. This makes the box more robust and less sensitive to moisture than any other Badass Box Versions before.
Each individual box is tested for correct functionality before and after casting.
How does it work Badass Box 4?
This tuning set is equipped with the Badass Box 4 Shimano 2019. After the Badass Box Once plugged in, it transmits a modified signal, allowing the 25 km/h speed limit to be circumvented and exceeded. This occurs contactlessly, i.e., without interfering with the engine electronics. The engine does not require any complicated opening, and there is no risk of damage.
Important note:
Due to the described functional principle, the e-bike display will no longer display correct values when tuning is active. This applies to both speed and derived values. We recommend using GPS-enabled devices, such as bike computers or smartphones, to record accurate ride data. You can find special handlebar mounts for smartphones in our shop. here.
Within the Badass Box In the 4th generation, the CR2 battery of the previous models was replaced with a more powerful AAA battery. Thanks to the specially developed and patented FEET (Field Enhancement & Elimination Technology), you can go a long way with a single battery. If necessary, the battery can be replaced at any time, without any tools. Replacement batteries can be purchased inexpensively almost anywhere. The manufacturer recommends replacing the battery once a year at the start of the season.
BadassBox 4 Shimano X-Set – The most important information at a glance:
-25 km/h speed limit for Shimano e-bikes is completely lifted.
-Patented snap closure allows the box to be put on and taken off quickly.
-Slim housing for even easier installation.
-Replaceable 1,5V AAA battery (IEC R03) with long range, partly due to patented field amplification technology.
-Potting compound from the automotive industry ensures robustness and protects the Badass Box 4 from moisture.
-Double quality control during production.
-Developed and manufactured in Germany.
Installation Guide
You'll find the integrated Shimano sensor near the dropout of your e-bike. To access the sensor, you'll need to remove the rear wheel:
Now you need to find the position of the integrated sensor in the dropout (the sensor shown is an example):
Now loosen the screws of the bracket that attaches the sensor (example image) to the dropout:
Now you have to attach the universal adapter with cylinder head screw, washer and nut (all included in delivery) to the Shimano sensor (example image):
Now you can attach the universal adapter with the screwed-on Shimano sensor (example image) to the chainstay using the supplied cable ties:
Now push the Badass Box onto the adapter until it clicks into place. Reinstall the rear wheel. Then mount the spoke magnet and align it with the edge of the housing of the Badass Box That's it – your e-bike is tuned and rides much faster!
BadassBox 4 Shimano X-Set – Compatibility
-E-bikes with Shimano mid-engines.
-Compatible with firmware up to 4.8.0.
-Compatible with mechanical and electronic gearshifts (Di2). Except Nexus Di2 hub gears.
Important note – please note:
You only need this set if you have a Shimano e-bike with a integrated in the dropout
Shimano sensor SM-DUE10 (pictured left) has:
If the sensor integrated into the dropout resembles the second sensor (pictured right), then it is the newer SM-DUE11 sensor from Shimano. In this case, you will need the set Badass Box 4 Shimano 2020.
If the Shimano SM-DUE10 sensor (pictured left) of your e-bike is easily accessible on the chainstay, you only need the usual Badass Box 4 for Shimano.
To install an E-Bike tuning chip in your E-Bike it is sometimes special tools necessary. Please check previously whether you have to open the engine compartment to access the motor connectors. This is especially true for products from the Modules, Kit, Dongle and Sensor.
Normally (but not always) opening the engine compartment requires loosening the crank. To do this, you will need a Crank puller. Some engines also have a Spider Tool This is important for opening the lock ring on the chainring - because the chainring must be loosened here so that the motor cover can be removed to access the inside of the motor. If you want to replace the chainring (wear, change the gear ratio), you often need a Spider Tool. The necessary special tools can also be found in our shop. To remove the engine cover, you usually need a Torx or Allen key. For installing the modules, appropriate Pliers from the electronics sector.
Do you decide not for a tuning solution that you have to install in the engine compartment (Box, Software), there is no need for any tools. In our Guide you will find further tips.
Reviews
The EBikeTuningShop and EBikeTuningBlog We'll keep you regularly informed about the latest e-bike tuning and e-scooter tuning products and solutions. You can sign up for our free newsletter here:
warnings
warnings
Important information on tuning measures for e-bikes and e-scooters
We expressly point out that any modification to e-bikes and e-scooters – whether through hardware tuning (e.g. tuning chips, dongles, sensor adapters) or software tuning (e.g. apps, programs or USB tools) – can have consequences.
Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads as defined by the StVZO (Road Traffic Licensing Regulations). Legal use is therefore only possible on private property or - if permitted - in competitions. Riding an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license (Section 21 of the Road Traffic Act) and driving without insurance (Section 6 of the PflVG). Tuning measures on e-bikes can lead to the loss of warranty rights and manufacturer guarantees. Furthermore, tuning measures can lead to the loss of insurance coverage and benefits from accident victim assistance in the event of an accident. The e-bike (or e-scooter) modified by tuning measures is subject to additional stress due to the higher speed, which can lead to safety risks.
Payment & Shipping
Delivery time, shipping costs, minimum order value and payment methods:
Delivery time:
The processing time for physical products generally begins only after payment has been receivedWithin Germany, it is usually 1-3 business daysIn exceptional cases, processing may take up to... 8 business days Extend the delivery time. Delivery times for international destinations may also vary.
Please note: A DHL shipment confirmation You will only receive this information once the shipment has been scanned for the first time at the parcel center. Only from this point onward will the shipment be trackable.
Due to high demand, ongoing incoming goods, or anticipated short-notice restocks, some products may experience longer processing times. We appreciate your understanding.
Note regarding digital products / license codes: License codes and license keys are not included in the package, but by email Shipped. Processing will only begin after payment is received. Please note that instant transfer Sofort does not automatically correspond to a direct bank credit and in individual cases it may also be the case that Credit card payments Delays may occur during payment processing. The respective license code will then be generated and sent. In some cases, this can take several hours. If you do not receive a license code, please always inform us. Order number in the format xxx-xxx-xxx mit.
For customers from Switzerland: For deliveries to Switzerland we recommend here a separate service.
Shipping:
Shipping costs for Germany are €4,90; shipping is waived for orders over €180. For countries within the EU, shipping costs are €12,90; shipping is waived for orders over €2.000. We currently do not ship to countries outside the EU. We also do not ship to the USA, France, or Canada (including any overseas territories). We ask that you bear the costs of any return shipments yourself. Please note that customs duties may apply in countries outside the European Union.
Minimum order value:
The minimum order value is €25. Only above this amount are advance payment, PayPal, and bank transfer available as payment methods.
Maximum order value:
The maximum order value for orders outside the EU is €1.000. The maximum order value within the EU is €12.500.
Payment in advance via bank transfer:
Please transfer the total amount, including your order number, to our account, which was communicated to you in the confirmation email. Please note that transfers within Germany can take up to three business days. Transfers from abroad, especially from Austria, usually reach us very quickly. Transfers from other countries can take slightly longer on average.
Payment in advance via Paypal:
At the end of the ordering process, you will be redirected to the PayPal page. There you can initiate your payment. Once the PayPal transaction is complete, your order status will change in the shop. The goods will then be shipped as soon as possible.
Do you need help choosing the right tuning product or have questions about ordering, shipping, or invoicing? Here you'll find the quickest way to a suitable answer.
Find out the exact model name of your engine. (Read the instructions and/or data sheet for the e-bike or e-scooter). Now turn the Filter im
Shop on your engine. Or: Read the Guide Completely. In my experience, you'll know 80% more afterwards than before.
We will answer your questions in the chat: See the speech bubble in the bottom right corner.
Report Please log in so that you receive our reply by email; otherwise, our reply will only appear in your active browser window. If the speech bubble is not visible, please use the second option.
2nd Mail*
Send us a message team@ebiketuningshop.comThis is another easy way to access our fast ticketing system.
Please describe your request as precisely as possible:
Engine version
Order number
Important instructions
For initial inquiries, please always wait for a response from us first.
Please do not submit multiple requests. We process an extremely high volume of requests daily, so there may sometimes be longer waiting times. Please also check your spam folder for a reply from us.
Shipping: For hardware products, you will receive an email with the tracking number on the evening of shipment. For software products, you will receive your license code after payment has been received and a short processing time has elapsed.
Bill: The invoice will be sent to you separately by email. Please keep it for your records. The delivery note is always included with the goods.
