MT Flasher for Ninebot G30D
AVAILABILITY: In stock
PRODUCT TYPE: Ninebot
BRAND: MountainTuning
MT-Flasher for Ninebot G30D – Professional tool for firmware customization
Plug & Play tool for flashing firmware on Ninebot G30D / G30D2 e-scooters. By uploading new software to the e-scooter controller, you can implement firmware hacks that can increase the vehicle's performance and speed, among other things. The MT-Flasher also offers numerous other options – for example, you can flash and test your own firmware, perform downgrades and upgrades on the controller, adjust the scooter's performance, etc. Thanks to Plug & Play, this has never been easier than with the MT-Flasher.
The MT Flasher for Ninebot G30D (and G30D2) is a powerful programming tool for easy customization and modification of the firmware of your Ninebot G30D ControllersThe device uses the SWD interface (Serial Wire Debug) and is fully compatible with all common programs that are otherwise used with an ST-Link. Thus, the MT-Flasher represents a convenient alternative to DIY solutions that require independent adaptation of ST-Link adapters.
Plug & Play – Easy handling without soldering
The MT-Flasher was specially designed for quick and easy to use Thanks to the integrated Plug-and-play connector for power supply You can connect your device directly, without additional power sources or manual wiring. high-quality test needles for SWDIO and SWCLK included in the delivery, with which you can connect the flasher safely and reliably to the controller – without any soldering!
Compatibility & Usage
- Full compatibility with all common ST-Link programs
- Direct connection via SWD – No additional interface required
- Plug-&-Play power supply – Easy power supply for the controller
- Test needles for SWDIO & SWCLK – No soldering or fiddling necessary
- Ideal for developers & technology enthusiastswho want to modify or customize the firmware
Possible applications
- Firmware updates, downgrades & upgrades for Ninebot G30D controller
- Performance optimization & adjustment of driving parameters
- Troubleshooting & Debugging for developers and hobbyists
- Flash & test your own firmware
Whether you want to unlock new features, optimize the speed and performance of your vehicle or make individual adjustments to the software – the MT Flasher for Ninebot G30D offers you a powerful and easy-to-use solution that optimally supports you.
Important instructions
- No software support - It will no programs or firmware downloads For software and manuals, we recommend exchanging them in Community forums like Scooter fun.
- Use at your own risk – Incorrect application can Damage to the controller The manufacturer assumes no liability for any resulting damage.
Summary – The most important advantages at a glance:
- Professional Firmware Tool (SWD) to adapt the firmware of the Ninebot G30D Controllers
- Alternative to DIY solutionsbased on ST-Link – no custom construction necessary
- Firmware updates, downgrades, debugging and optimization with Plug-and-play handling
- No soldering required - Thanks to SWD test needles the connection is simple and safe
- Complete accessories included - USB-C to USB-B cable and test pins for SWDIO/SWCLK included
- For developers & enthusiasts – Ideal for improving performance, customizing or restoring the controller
- No firmware downloads or support – For programs and exchanges, please refer to community forums
- Personal responsibility – Use at your own risk, as incorrect use may damage the controller
With the MT Flasher for Ninebot G30D you get a powerful and reliable tool that offers you maximum flexibility for individual firmware customizations.
Legal notice: The operation of e-scooters with deactivated speed limits is not permitted on public roads in Germany. Their use is permitted only on private property or for advertising purposes.
Comparison of e-bike tuning products:
| JUM-Ped | Mountain Tuning | Badass Box | RedPed | VOLspeed | PearTune | SpeedBox | MBIQ | sIMPLEk | Sx2 dongle | |
| Art | Software |
Software |
Box | module | module | module | module |
module / Sensor |
module / Dongle |
Dongle |
| Features | ***** | ***** | * | ***** | **** | *** | *** | *** | *** / ** | * |
| Easy installation | ***** | ***** | **** | ** | ** | ** | ** | ** / * | ** / * | * |
| Invisible after installation | ***** | ***** | * | ***** | ***** | ***** | ***** | ***** | ***** / **** | **** |
| Switch on / off while driving |
* Gerät |
***** Gerät, Display |
* Essay |
***** App, Display |
***** Display |
***** Display |
***** (App), Display |
*** Display, Magnet |
***** / **** Display / Plug |
**** Plug |
| No more tuning on the bike | ***** | ***** | ***** | * | * | * | * | * | * / **** | **** |
| Invisible dismantling | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** / *** | *** |
| Easy dismantling | ***** | ***** | ***** | ** | ** | ** | ** | ** / * | ** / * | * |
| Display correct km/h |
***** Display |
***** Display |
* |
***** Display, App |
***** Display |
***** Display |
***** Display, App |
* |
**** Display |
* |
| Dethrottling | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** |
| Thrushes | * | ***** | * | ***** | ***** | ***** | ***** | * | * | * |
| price in euro |
169 to 249 |
189 – 349 | 139 – 164 |
219 to 239 |
159 – 219 |
139 to 259 |
139 to 349 |
89 to 199 |
89 to 219 |
139 to 159 |
Tools
To install an E-Bike tuning chip in your E-Bike it is sometimes special tools necessary. Please check previously whether you have to open the engine compartment to access the motor connectors. This is especially true for products from the Modules, Kit, Dongle and Sensor.
Normally (but not always) opening the engine compartment requires loosening the crank. To do this, you will need a Crank puller. Some engines also have a Spider Tool This is important for opening the lock ring on the chainring - because the chainring must be loosened here so that the motor cover can be removed to access the inside of the motor. If you want to replace the chainring (wear, change the gear ratio), you often need a Spider Tool. The necessary special tools can also be found in our shop. To remove the engine cover, you usually need a Torx or Allen key. For installing the modules, appropriate Pliers from the electronics sector.
Do you decide not for a tuning solution that you have to install in the engine compartment (Box, Software), there is no need for any tools. In our Guide you will find further tips.
The EBikeTuningShop and the EBikeTuningBlog We'll keep you regularly informed about the latest e-bike tuning and e-scooter tuning products and solutions. You can sign up for our free newsletter here:
warnings
Important information on tuning measures for e-bikes and e-scooters
We expressly point out that any modification to e-bikes and e-scooters – whether through hardware tuning (e.g. tuning chips, dongles, sensor adapters) or software tuning (e.g. apps, programs or USB tools) – can have consequences.
Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads as defined by the StVZO (Road Traffic Licensing Regulations). Legal use is therefore only possible on private property or - if permitted - in competitions. Riding an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license (Section 21 of the Road Traffic Act) and driving without insurance (Section 6 of the PflVG). Tuning measures on e-bikes can lead to the loss of warranty rights and manufacturer guarantees. Furthermore, tuning measures can lead to the loss of insurance coverage and benefits from accident victim assistance in the event of an accident. The e-bike (or e-scooter) modified by tuning measures is subject to additional stress due to the higher speed, which can lead to safety risks.
Delivery time, shipping costs, minimum order value and payment methods:
Delivery time:
Delivery takes 1-3 business days within Germany. In exceptional cases, it can take up to 8 business days. Delivery times outside Germany may take longer. Please understand that due to high demand, some products may experience longer delivery times.
Delivery area:
We deliver to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.
For customers from Switzerland: For deliveries to Switzerland we recommend here a separate service.
Shipping:
Shipping costs for Germany are €4,90; shipping is waived for orders over €180. For countries within the EU, shipping costs are €12,90; shipping is waived for orders over €2.000. We currently do not ship to countries outside the EU. We also do not ship to the USA, France, or Canada (including any overseas territories). We ask that you bear the costs of any return shipments yourself. Please note that customs duties may apply in countries outside the European Union.
Minimum order value:
The minimum order value is €25. Only above this amount are advance payment, PayPal, and bank transfer available as payment methods.
Maximum order value:
The maximum order value for orders outside the EU is €1.000. The maximum order value within the EU is €12.500.
Payment in advance via bank transfer:
Please transfer the total amount, including your order number, to our account, which was communicated to you in the confirmation email. Please note that transfers within Germany can take up to three business days. Transfers from abroad, especially from Austria, usually reach us very quickly. Transfers from other countries can take slightly longer on average.
Payment in advance via Paypal:
At the end of the ordering process, you will be redirected to the PayPal page. There you can initiate your payment. Once the PayPal transaction is complete, your order status will change in the shop. The goods will then be shipped as soon as possible.
