PearTune MSO 3.0 Still On for Bosch Gen4 Smart System 2022
AVAILABILITY: In stock
PRODUCT TYPE: Bosch Smart System
BRAND: PearTune
You save: €20,00 (9%)
PearTune MSO 3.0 Still On for Bosch Gen4 Smart System 2022
Also compatible with Bosch Gen5!
The PearTune MSO 3.0 lifts the 25 km/h speed limit of Bosch Smart System e-bike drives. This gives you the option to fully exploit the enormous potential of these powerful motors. "MSO" therefore stands for nothing other than "Max Speed Off"!
Please keep in mind: This is the "Still On" version of the PearTune MSO 3.0 module - this means that in this case the tuning eternity active as soon as you turn on your e-bike. The Still On version is intended for Bosch e-bikes that do not have buttons to turn the tuning on and off (+ and - buttons). If your Bosch e-bike has the corresponding buttons, please select the Normal Version.
You need a PC or a smartphone to operate the PearTune Module not.
Correct speed remains readable
Was the PearTune If the tuning chip is activated, your e-bike display will show the correct speed up to 22,9 km/h. At higher values, the actual speed remains readable, albeit via the second digit and the decimal place of the speedometer. This means that a displayed speed of 23,4 km/h would actually correspond to 34 km/h, a display of 24,0 km/h would correspond to 40 km/h, etc.
The e-bike display shows all other values correctly.
Mounting
The PearTune MSO 3.0 is a module that must be installed between the motor and the speed sensor, as well as between the motor and the speedometer or display. To access the necessary connectors, you'll need to briefly remove the plastic cover of the motor during installation.
Attention: If you need a crank puller to open the engine, you can purchase this module to get a cheap crank puller in a special offer here buy with it.
Important: When you this PearTune If you want to use the module on a brand new e-bike, you should first ride the bike for at least 1 km before installing the tuning.
PearTune MSO 3.0 Still On for Bosch Gen4 Smart System 2022 – Features at a glance
- Complete abolition of speed limits.
- Correct speed remains visible on the display, although (from 22,9 km/h) over the second digit and the decimal place.
- Tuning is always active ("Still On") and cannot be switched off.
- The PearTune Module does not require its own battery.
- Plug & Play: The module configures itself after installation.
- Compact & lightweight: The PearTune The module is very small and therefore easy to install. The tuning parts weigh just 10–18 g.
- Waterproof original plugs for connection to the engine and moisture-proof PearTune Plugs for connection to the display and speed sensor ensure a secure connection.
PearTune MSO 3.0 Still On for Bosch Gen4 Smart System 2022 Compatibility
- Bosch Smart System e-bikes with mid-engines from 2022 (also known as “Bosch BES3”)
- Also compatible with Bosch Smart System Gen5 (from 2024), sometimes referred to as “Bosch CX Gen5” (assuming the e-bike does not have a rim magnet or ABS Pro).
- Compatible with all displays & control units: Kiox 300 / Kiox 500 / Kiox BUI330 / Intuvia 100 / System Controller / LED Remote / Mini Remote/ Purion 200. Also compatible with Purion 400 (Bosch Gen5).
- Addendum: Compatible with Bosch Smart System Upgrade April 2025 This tuning tool is also compatible with the Bosch Smart System upgrade from April 2025 (sometimes referred to as version "15.10.1" or "15.13.1"). You can identify the upgrade by the following software versions: Drive Unit Performance Line CX: 15.24.2 / LED Remote: 15.12.3 / Kiox 300: 15.10.0 / PowerTube 750: 15.10.1
- Compatible with LED-Remote software version 11.9.3 and the drive unit firmware (Drive Unit) 11.13.0. Also compatible with firmware 12.13.0 / 13.13.1However, do not perform any further software updates on the drive system. This may impair the functionality of the tuning.
- This tuning module is compatible with the Bosch Update 13.13.1. The tuning works normally (no error messages)
Attention: Please do not perform any Bosch updates after installing and using a tuning program! Compatibility may no longer be guaranteed.
Important: Not compatible with e-bikes that have a magnet on the valve (rim magnet). These sensors are installed deep within the motor and cannot be optimized with modules.
Not compatible with Bosch e-bikes with ABS system!
Our advice: The PearTune The MSO 3.0 Tuning Module is limited in its functionality to the absolute essentials - namely the removal of the 25 km/h speed limit. This module is also available in a MSO 4.0 Version that has a significantly wider range of functions. For example, the maximum supported speed can be set to a custom value; or you can set a custom activation code. The Chip lock Function that makes the tuning temporarily “invisible” to outsiders:
PearTune MSO 4.0 V2 for Bosch Gen4 Smart System 2022
Tip: Bosch Smart System E-Bikes (BES3) can be easily identified by the plug on the charging cable.
SQUARE plug = Bosch Smart System BES3 (Gen4) + Bosch Gen5:
ROUND plug = Bosch Gen2, Gen3 & Gen4:
Does your Bosch E-Bike charging cable have a square plug (as shown above), you have the correct Tuning module selected (if the bike does not have ABS and a rim magnet). If your Bosch e-bike does not have either of these connectors, you either do NOT have a Bosch e-bike, or you have an e-bike with the old Gen1 drive (Classic Line).
Comparison of e-bike tuning products:
| JUM-Ped | Mountain Tuning | Badass Box | RedPed | VOLspeed | PearTune | SpeedBox | MBIQ | sIMPLEk | Sx2 dongle | |
| Art | Software |
Software |
Box | module | module | module | module |
module / Sensor |
module / Dongle |
Dongle |
| Features | ***** | ***** | * | ***** | **** | *** | *** | *** | *** / ** | * |
| Easy installation | ***** | ***** | **** | ** | ** | ** | ** | ** / * | ** / * | * |
| Invisible after installation | ***** | ***** | * | ***** | ***** | ***** | ***** | ***** | ***** / **** | **** |
| Switch on / off while driving |
* Gerät |
***** Gerät, Display |
* Essay |
***** App, Display |
***** Display |
***** Display |
***** (App), Display |
*** Display, Magnet |
***** / **** Display / Plug |
**** Plug |
| No more tuning on the bike | ***** | ***** | ***** | * | * | * | * | * | * / **** | **** |
| Invisible dismantling | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** / *** | *** |
| Easy dismantling | ***** | ***** | ***** | ** | ** | ** | ** | ** / * | ** / * | * |
| Display correct km/h |
***** Display |
***** Display |
* |
***** Display, App |
***** Display |
***** Display |
***** Display, App |
* |
**** Display |
* |
| Dethrottling | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** |
| Thrushes | * | ***** | * | ***** | ***** | ***** | ***** | * | * | * |
| price in euro |
169 to 249 |
189 – 349 | 139 – 164 |
219 to 239 |
159 – 219 |
139 to 259 |
139 to 349 |
89 to 199 |
89 to 219 |
139 to 159 |
Tools
To install an E-Bike tuning chip in your E-Bike it is sometimes special tools necessary. Please check previously whether you have to open the engine compartment to access the motor connectors. This is especially true for products from the Modules, Kit, Dongle and Sensor.
Normally (but not always) opening the engine compartment requires loosening the crank. To do this, you will need a Crank puller. Some engines also have a Spider Tool This is important for opening the lock ring on the chainring - because the chainring must be loosened here so that the motor cover can be removed to access the inside of the motor. If you want to replace the chainring (wear, change the gear ratio), you often need a Spider Tool. The necessary special tools can also be found in our shop. To remove the engine cover, you usually need a Torx or Allen key. For installing the modules, appropriate Pliers from the electronics sector.
Do you decide not for a tuning solution that you have to install in the engine compartment (Box, Software), there is no need for any tools. In our Guide you will find further tips.
The EBikeTuningShop and the EBikeTuningBlog We'll keep you regularly informed about the latest e-bike tuning and e-scooter tuning products and solutions. You can sign up for our free newsletter here:
warnings
Important information on tuning measures for e-bikes and e-scooters
We expressly point out that any modification to e-bikes and e-scooters – whether through hardware tuning (e.g. tuning chips, dongles, sensor adapters) or software tuning (e.g. apps, programs or USB tools) – can have consequences.
Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads as defined by the StVZO (Road Traffic Licensing Regulations). Legal use is therefore only possible on private property or - if permitted - in competitions. Riding an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license (Section 21 of the Road Traffic Act) and driving without insurance (Section 6 of the PflVG). Tuning measures on e-bikes can lead to the loss of warranty rights and manufacturer guarantees. Furthermore, tuning measures can lead to the loss of insurance coverage and benefits from accident victim assistance in the event of an accident. The e-bike (or e-scooter) modified by tuning measures is subject to additional stress due to the higher speed, which can lead to safety risks.
Delivery time, shipping costs, minimum order value and payment methods:
Delivery time:
Delivery takes 1-3 business days within Germany. In exceptional cases, it can take up to 8 business days. Delivery times outside Germany may take longer. Please understand that due to high demand, some products may experience longer delivery times.
Delivery area:
We deliver to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.
For customers from Switzerland: For deliveries to Switzerland we recommend here a separate service.
Shipping:
Shipping costs for Germany are €4,90; shipping is waived for orders over €180. For countries within the EU, shipping costs are €12,90; shipping is waived for orders over €2.000. We currently do not ship to countries outside the EU. We also do not ship to the USA, France, or Canada (including any overseas territories). We ask that you bear the costs of any return shipments yourself. Please note that customs duties may apply in countries outside the European Union.
Minimum order value:
The minimum order value is €25. Only above this amount are advance payment, PayPal, and bank transfer available as payment methods.
Maximum order value:
The maximum order value for orders outside the EU is €1.000. The maximum order value within the EU is €12.500.
Payment in advance via bank transfer:
Please transfer the total amount, including your order number, to our account, which was communicated to you in the confirmation email. Please note that transfers within Germany can take up to three business days. Transfers from abroad, especially from Austria, usually reach us very quickly. Transfers from other countries can take slightly longer on average.
Payment in advance via Paypal:
At the end of the ordering process, you will be redirected to the PayPal page. There you can initiate your payment. Once the PayPal transaction is complete, your order status will change in the shop. The goods will then be shipped as soon as possible.
