OUTLET: PearTune MSO Normal for Specialized 1.1 / 1.2 SL (from 2020)
AVAILABILITY: In stock
PRODUCT TYPE: Specialized
BRAND: PearTune
You save: €20,00 (9%)
PearTune MSO for Specialized 1.1 / 1.2 SL engines (from model year 2020)
The proven PearTune Tuning tool in a version specifically for Specialized 1.1 SL & 1.2 SL e-bike motors. With this tool, you can completely remove the annoying 25 km/h speed limit, so that your Specialized The drive can finally reach its full potential. Accordingly, "MSO" stands for nothing other than "Max Speed Off"!
In this PearTune model, the display shows correct values (e.g. the current speed), even when tuning is active. This also applies to the Specialized Mission Control App.
The PearTune MSO for Specialized 1.1 SL engines are available in two different versions, namely the “NORMAL” and the “STILL ON” version:
NORMAL:
Tuning can be turned on and off using the WALK button or, alternatively, by quickly pressing the + - buttons twice. To confirm that tuning has been activated, the display briefly shows a speed of 2 km/h. If tuning is turned off again, the display briefly shows a value of 9 km/h as confirmation. Simply select the "Display" version if your e-bike has the corresponding control buttons.
STILL ON:
In this version, tuning is possible after installing the PearTune The module is always active as soon as you turn on the e-bike. The tuning only switches off when you turn off the e-bike. The STILL ON version is intended for Specialized 1.1 SL e-bikes without WALK or + buttons (mostly found on CREO and some LEVO models). In this case, the STILL ON version must be selected.
Advantages at a glance
-25 km/h speed limit is completely lifted
-Correct data in the e-bike display, even with active tuning
-Tuning can be activated / deactivated at any time using the WALK or + - buttons (for Specialized 1.1 SL bikes without corresponding control buttons, the module is also available in a “Still On” version, where the tuning is always active).
-The PearTune Module does not require its own battery
-100% waterproof
Mounting
At the PearTune The tuning tool is a module that must be connected between the display and the speed sensor connection on the engine. This requires, among other things, briefly removing the engine cover and unscrewing the display.
Please note: If you PearTune If you are installing it on a completely new e-bike, you must ride at least 1 kilometer before switching on the tuning for the first time.
Compatibility
This tuning module is compatible with all Specialized VADO, LEVO, CREO, COMO and KENEVO e-bikes, provided they are equipped with a 1.1 / 1.2 SL engine from model year 2020 equipped.
Displays: Compatible with MasterMind TCU, MasterMind TCD, Mission Control
Compatible with all Specialized Apps (Mission Control & new Specialized app)
Compatible with all known Specialized Software variants (as of August 2024)
Not suitable for hardtail.
Comparison of e-bike tuning products:
| JUM-Ped | Mountain Tuning | Badass Box | RedPed | VOLspeed | PearTune | SpeedBox | MBIQ | sIMPLEk | Sx2 dongle | |
| Art | Software |
Software |
Box | module | module | module | module |
module / Sensor |
module / Dongle |
Dongle |
| Features | ***** | ***** | * | ***** | **** | *** | *** | *** | *** / ** | * |
| Easy installation | ***** | ***** | **** | ** | ** | ** | ** | ** / * | ** / * | * |
| Invisible after installation | ***** | ***** | * | ***** | ***** | ***** | ***** | ***** | ***** / **** | **** |
| Switch on / off while driving |
* Gerät |
***** Gerät, Display |
* Essay |
***** App, Display |
***** Display |
***** Display |
***** (App), Display |
*** Display, Magnet |
***** / **** Display / Plug |
**** Plug |
| No more tuning on the bike | ***** | ***** | ***** | * | * | * | * | * | * / **** | **** |
| Invisible dismantling | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** / *** | *** |
| Easy dismantling | ***** | ***** | ***** | ** | ** | ** | ** | ** / * | ** / * | * |
| Display correct km/h |
***** Display |
***** Display |
* |
***** Display, App |
***** Display |
***** Display |
***** Display, App |
* |
**** Display |
* |
| Dethrottling | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** |
| Thrushes | * | ***** | * | ***** | ***** | ***** | ***** | * | * | * |
| price in euro |
169 to 249 |
189 – 349 | 139 – 164 |
219 to 239 |
159 – 219 |
139 to 259 |
139 to 349 |
89 to 199 |
89 to 219 |
139 to 159 |
Tools
To install an E-Bike tuning chip in your E-Bike it is sometimes special tools necessary. Please check previously whether you have to open the engine compartment to access the motor connectors. This is especially true for products from the Modules, Kit, Dongle and Sensor.
Normally (but not always) opening the engine compartment requires loosening the crank. To do this, you will need a Crank puller. Some engines also have a Spider Tool This is important for opening the lock ring on the chainring - because the chainring must be loosened here so that the motor cover can be removed to access the inside of the motor. If you want to replace the chainring (wear, change the gear ratio), you often need a Spider Tool. The necessary special tools can also be found in our shop. To remove the engine cover, you usually need a Torx or Allen key. For installing the modules, appropriate Pliers from the electronics sector.
Do you decide not for a tuning solution that you have to install in the engine compartment (Box, Software), there is no need for any tools. In our Guide you will find further tips.
The EBikeTuningShop and the EBikeTuningBlog We'll keep you regularly informed about the latest e-bike tuning and e-scooter tuning products and solutions. You can sign up for our free newsletter here:
warnings
Important information on tuning measures for e-bikes and e-scooters
We expressly point out that any modification to e-bikes and e-scooters – whether through hardware tuning (e.g. tuning chips, dongles, sensor adapters) or software tuning (e.g. apps, programs or USB tools) – can have consequences.
Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads as defined by the StVZO (Road Traffic Licensing Regulations). Legal use is therefore only possible on private property or - if permitted - in competitions. Riding an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license (Section 21 of the Road Traffic Act) and driving without insurance (Section 6 of the PflVG). Tuning measures on e-bikes can lead to the loss of warranty rights and manufacturer guarantees. Furthermore, tuning measures can lead to the loss of insurance coverage and benefits from accident victim assistance in the event of an accident. The e-bike (or e-scooter) modified by tuning measures is subject to additional stress due to the higher speed, which can lead to safety risks.
Delivery time, shipping costs, minimum order value and payment methods:
Delivery time:
Delivery takes 1-3 business days within Germany. In exceptional cases, it can take up to 8 business days. Delivery times outside Germany may take longer. Please understand that due to high demand, some products may experience longer delivery times.
Delivery area:
We deliver to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.
For customers from Switzerland: For deliveries to Switzerland we recommend here a separate service.
Shipping:
Shipping costs for Germany are €4,90; shipping is waived for orders over €180. For countries within the EU, shipping costs are €12,90; shipping is waived for orders over €2.000. We currently do not ship to countries outside the EU. We also do not ship to the USA, France, or Canada (including any overseas territories). We ask that you bear the costs of any return shipments yourself. Please note that customs duties may apply in countries outside the European Union.
Minimum order value:
The minimum order value is €25. Only above this amount are advance payment, PayPal, and bank transfer available as payment methods.
Maximum order value:
The maximum order value for orders outside the EU is €1.000. The maximum order value within the EU is €12.500.
Payment in advance via bank transfer:
Please transfer the total amount, including your order number, to our account, which was communicated to you in the confirmation email. Please note that transfers within Germany can take up to three business days. Transfers from abroad, especially from Austria, usually reach us very quickly. Transfers from other countries can take slightly longer on average.
Payment in advance via Paypal:
At the end of the ordering process, you will be redirected to the PayPal page. There you can initiate your payment. Once the PayPal transaction is complete, your order status will change in the shop. The goods will then be shipped as soon as possible.
