RedPed 2s for Shimano EP8 / EP800
AVAILABILITY: In stock
PRODUCT TYPE: Shimano
BRAND: RedPed
You save: €40,00 (19%)
RedPed 2s for Shimano EP8 / EP800
With the RedPed 2s tuning module allows you to get the most out of e-bikes with Shimano EP8 motors.
The RedPed 2s module is one of the most comprehensive tuning tools for e-bikes with Shimano EP8 drives. The module is compatible with the RedPed 2 app, so there are a wide variety of optimization options available.
The core function of the RedPed 2s is the removal of the 25 km/h speed limit, and numerous other settings can be configured via the app, such as individually setting the maximum speed or setting a custom activation code. Furthermore, the app can be used to display many useful driving parameters while on the go, including actual speed and distance traveled.
Compared to the previous model, the RedPed 2 Plus, offers that RedPed 2s a whole series of interesting improvements, e.g. for the first time the real speed can now be read in the e-bike display (via the second digit and the decimal place of the display).
Note: After installation, the RedPed can be activated/deactivated via the app as well as via the control buttons on the e-bike. not necessary to take your smartphone with you on every trip.
RedPed App - The E-Bike Tuning App:
Here are the new features of RedPed 2s compared to the previous RedPed 2 Plus:
-Real speed can be read as a decimal number in the e-bike display (previously only half of the actual speed was shown): From a speed of 22 km/h, the current speed is shown via the second digit and the decimal place of the display (a displayed speed of 23,5 km/h would therefore correspond to a real speed of 35 km/h, etc.).
-Very precise adjustment of the Wheel circumference via the AUTO function. Please note that a correct setting is important for a correct speed display.
-Mountain Mode for Di2 circuits: Since the RedPed If the split speed generated by the module always lags behind one wheel revolution, error W2 may occur on e-mountain bikes with Di011 gears at low speeds. The new function synchronizes the speed of the e-bike and the RedPeds (this can cause small jumps in the speed display of the e-bike display).
-Der trailing is now calculated automatically, even without having to enter the mileage.
-Easier reset of the module: Turn on the e-bike and plug the included reset cable into the reset connector. After 20 seconds, the RedPed Reset the module. Then simply remove the cable again.
RedPed 2s for Shimano EP8 / EP800 - Features
-Removal of the 25 km/h speed limit, allowing much faster driving with full motor assistance.
-Set Max Speed: The maximum supported speed can be set to an individual value via the app, from 15 km/h to 45 km/h (45 km/h is the theoretical maximum speed, the actual achievable speed depends on various factors, e.g. chainring and motor).
-Display of detailed driving parameters via the app (see below).
Tuning can be turned on and off via the app or using the light button. When activated using the light button, you can specify how often the light needs to be turned on and off to activate the tuning (press 0-20 times). The counter function shows how many times the light has already been turned on and off.
-Use the app to set whether the tuning should be active for just one ride or always.
-Tuning Timer: With this function, the tuning is deactivated after a self-set time as soon as the bike has come to a standstill (between 10 and 180 seconds).
-"Visibility": Set how long the module should be visible in the app after the e-bike is turned on. This can prevent unauthorized access by third parties.
-"Combination for visibility": Here you can set how often the light must be switched on and off to make the module visible.
-"Speed split at": Sets how the speed should be split (10-24 km/h). The higher the value, the better. However, if it's set too high, assistance will stop before the maximum speed is reached. In this case, the set value must be reduced again.
-Enter wheel diameter: By specifying the exact wheel diameter, an exact speed display as a decimal number in the e-bike display is guaranteed (AUTO function).
-Show real speed in the display as a decimal number (yes / no).
-Turn mountain mode on and off (see above).
-Lag: This value shows how many KM the engine is missing due to dividing the speed.
-Optional correct mileage after re-removal of the module.
Data display via app
RedPed The app not only lets you configure the tuning module settings, it can also display numerous useful driving parameters on the go. You can customize the display according to your personal preferences—for example, you can hide values or change the colors of columns and rows, etc. You can also change the font size in the settings (Android) or zoom in on the speedometer (iPhone).
Here are the driving parameters displayed, these are always real Values:
- Tuning Status (On/Off)
- Current speed
- Maximum speed
- driving time
- Average speed
- distance traveled
- Mileage
firmware Update
If necessary, a firmware update for the RedPed 2s module, so that the tuning can be updated again and again. To do so, you have to open the menu in the app and click on "Firmware Update". The "RedPed Version" shows the current firmware. The "Image Version" is the latest version. If this is higher than the "RedPed Version," the "Start Update" button will appear. As soon as you press the button, the update will begin. After the update, the module will restart, retaining all settings. The e-bike must not be turned off during the update.
Installation & Functionality
The RedPed The 2s module must be connected between the speed sensor and the motor (to access the required connectors, the motor's protective cover must be temporarily removed). In most cases, the module can be placed in the motor's connection area (sometimes in the frame tube). Further information can be found in the user manual. RedPed Module required no own battery; power is supplied via a free display socket.
The module's electronics have been coated with a layer of varnish and are also protected by a shrink tube with internal adhesive.
Once installed, the module measures the actual speed and generates its own speed signal for the engine control unit. This generates a lower speed, essentially outsmarting the 25 km/h speed limit. This allows for much faster driving with full engine support.
You can find installation and operating instructions here.
Compatibility
Typically, this RedPed 2s module is compatible with:
-E-Bikes with Shimano Steps EP8 / EP800 / DU-EP800 motors (up to motor firmware 4.2.0)
-Compatibility with EP801 & EP6 has not been tested and may not be guaranteed!
-Compatible with all displays
-Compatible with Di2 shifting
-If you have a Shimano Steps E-Bike from the E-series (E8000, E7000, E6100, E6000, E5000), please select the "RedPed 2s for Shimano E-Series.
-If you have a Shimano E-Bike with EP6 / EP801 drive, please select the "RedPed for Shimano EP6 / EP801".
Important: The tuning function of the RedPed 2s module can only be guaranteed up to the above-mentioned motor firmware version. If the Shimano motor is updated to a higher firmware version after purchasing the module, the tuning function not more guarantee. So please no Perform updates on your Shimano e-bike!
RedPed App - The E-Bike Tuning App:
Specifications
Dimensions 3,0 x 2,5 x 0,9 cm
Cable length 13cm, 4cm
weight 10g
Power 150mW
Supply voltage max 12 VDC
Wireless connection Bluetooth 4.0
Comparison of e-bike tuning products:
| JUM-Ped | Mountain Tuning | Badass Box | RedPed | VOLspeed | PearTune | SpeedBox | MBIQ | sIMPLEk | Sx2 dongle | |
| Art | Software |
Software |
Box | module | module | module | module |
module / Sensor |
module / Dongle |
Dongle |
| Features | ***** | ***** | * | ***** | **** | *** | *** | *** | *** / ** | * |
| Easy installation | ***** | ***** | **** | ** | ** | ** | ** | ** / * | ** / * | * |
| Invisible after installation | ***** | ***** | * | ***** | ***** | ***** | ***** | ***** | ***** / **** | **** |
| Switch on / off while driving |
* Gerät |
***** Gerät, Display |
* Essay |
***** App, Display |
***** Display |
***** Display |
***** (App), Display |
*** Display, Magnet |
***** / **** Display / Plug |
**** Plug |
| No more tuning on the bike | ***** | ***** | ***** | * | * | * | * | * | * / **** | **** |
| Invisible dismantling | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** / *** | *** |
| Easy dismantling | ***** | ***** | ***** | ** | ** | ** | ** | ** / * | ** / * | * |
| Display correct km/h |
***** Display |
***** Display |
* |
***** Display, App |
***** Display |
***** Display |
***** Display, App |
* |
**** Display |
* |
| Dethrottling | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** |
| Thrushes | * | ***** | * | ***** | ***** | ***** | ***** | * | * | * |
| price in euro |
169 to 249 |
189 – 349 | 139 – 164 |
219 to 239 |
159 – 219 |
139 to 259 |
139 to 349 |
89 to 199 |
89 to 219 |
139 to 159 |
Tools
To install an E-Bike tuning chip in your E-Bike it is sometimes special tools necessary. Please check previously whether you have to open the engine compartment to access the motor connectors. This is especially true for products from the Modules, Kit, Dongle and Sensor.
Normally (but not always) opening the engine compartment requires loosening the crank. To do this, you will need a Crank puller. Some engines also have a Spider Tool This is important for opening the lock ring on the chainring - because the chainring must be loosened here so that the motor cover can be removed to access the inside of the motor. If you want to replace the chainring (wear, change the gear ratio), you often need a Spider Tool. The necessary special tools can also be found in our shop. To remove the engine cover, you usually need a Torx or Allen key. For installing the modules, appropriate Pliers from the electronics sector.
Do you decide not for a tuning solution that you have to install in the engine compartment (Box, Software), there is no need for any tools. In our Guide you will find further tips.
The EBikeTuningShop and the EBikeTuningBlog We'll keep you regularly informed about the latest e-bike tuning and e-scooter tuning products and solutions. You can sign up for our free newsletter here:
warnings
Important information on tuning measures for e-bikes and e-scooters
We expressly point out that any modification to e-bikes and e-scooters – whether through hardware tuning (e.g. tuning chips, dongles, sensor adapters) or software tuning (e.g. apps, programs or USB tools) – can have consequences.
Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads as defined by the StVZO (Road Traffic Licensing Regulations). Legal use is therefore only possible on private property or - if permitted - in competitions. Riding an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license (Section 21 of the Road Traffic Act) and driving without insurance (Section 6 of the PflVG). Tuning measures on e-bikes can lead to the loss of warranty rights and manufacturer guarantees. Furthermore, tuning measures can lead to the loss of insurance coverage and benefits from accident victim assistance in the event of an accident. The e-bike (or e-scooter) modified by tuning measures is subject to additional stress due to the higher speed, which can lead to safety risks.
Delivery time, shipping costs, minimum order value and payment methods:
Delivery time:
Delivery takes 1-3 business days within Germany. In exceptional cases, it can take up to 8 business days. Delivery times outside Germany may take longer. Please understand that due to high demand, some products may experience longer delivery times.
Delivery area:
We deliver to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.
For customers from Switzerland: For deliveries to Switzerland we recommend here a separate service.
Shipping:
Shipping costs for Germany are €4,90; shipping is waived for orders over €180. For countries within the EU, shipping costs are €12,90; shipping is waived for orders over €2.000. We currently do not ship to countries outside the EU. We also do not ship to the USA, France, or Canada (including any overseas territories). We ask that you bear the costs of any return shipments yourself. Please note that customs duties may apply in countries outside the European Union.
Minimum order value:
The minimum order value is €25. Only above this amount are advance payment, PayPal, and bank transfer available as payment methods.
Maximum order value:
The maximum order value for orders outside the EU is €1.000. The maximum order value within the EU is €12.500.
Payment in advance via bank transfer:
Please transfer the total amount, including your order number, to our account, which was communicated to you in the confirmation email. Please note that transfers within Germany can take up to three business days. Transfers from abroad, especially from Austria, usually reach us very quickly. Transfers from other countries can take slightly longer on average.
Payment in advance via Paypal:
At the end of the ordering process, you will be redirected to the PayPal page. There you can initiate your payment. Once the PayPal transaction is complete, your order status will change in the shop. The goods will then be shipped as soon as possible.
