| EBT Unlock Key | EBTsmart Unlock Key | EBTsmart Unlock Key Switch | Mountain Tuning | Badass Box | RedPed | VOLspeed | PearTune | SpeedBox | MBIQ | sIMPLEk | Splug | |
| Discover African | License code | License code | License code + hardware | Display / Module | Box | module | module | module | module | Module / Sensor | Kit / Dongle | Dongle |
| Features | **** | ***** | ***** | ***** | * | ***** | **** | *** | *** | *** | ** | ** |
| Easy installation | ***** | ***** | *** | *** | **** | ** | ** | ** | ** | ** / * | ** / * | ** |
| Invisible after installation | ***** | ***** | **** | *** | * | ***** | ***** | ***** | ***** | ***** | **** | *** |
| Switch on / off while driving | * Browser / USB |
* Browser / USB |
*** Sensor |
***** Display |
* Essay |
***** App, Display |
***** Display |
***** Display |
***** Display / App |
*** Sensor |
**** Display / Plug |
**** Dongle |
| No more tuning module on the bike | ***** | ***** | *** | *** | ***** | * | * | * | * | * | *** | **** |
| Correct display km / km/h | ***** | ***** at 32 km/h level |
** | ***** Display |
* | ***** Display, App |
***** | ***** | **** depending on the system |
* | **** | * |
| Dethrottling | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** |
| price in euro | from 69 | from 179 | from 179 | about 99 to 219 | about 154 to 239 | about 149 to 229 | about 139 to 199 | about 139 to 349 | about 149 to 349 | about 124 to 219 | about 69 to 159 | approx. 219 |
SpeedBox 1.3 B.Tuning for Shimano (EP8 / EP800) with App
AVAILABILITY: In stock
PRODUCT TYPE: Shimano
BRAND: speed box
You save: €50,00 (13%)
SpeedBox 1.3 B.Tuning for Shimano EP8 / EP800
E-bike tuning with an app! Unlike the “normal” SpeedBox 1.3 for Shimano EP8 (& EP8 RS) engines is the SpeedBox 1.3 “B.Tuning” with the SpeedBox App compatible, significantly expanding the range of functions. The core function, of course, is still the removal of the 25 km/h speed limit, allowing you to ride much faster with full motor support. Using the app, you can, for example, save trip data and access it at will.
In which SpeedBox 1.3 B.Tuning Tool is a newly designed chip or module that must be connected to the engine. The chip not only comes with completely new hardware and firmware, but also with Bluetooth technology for connecting to a smartphone.
Important note: The manufacturer recommends not exceeding a speed of 35 km/h to avoid error W011. For B.Tuning models, the maximum speed can be adjusted in the SpeedBox App adjust accordingly.
After installing the SpeedBox 1.3 Tuning Chips, the e-bike display only shows real values up to a speed of 23 km/h. However, you can easily view the real values (current speed, etc.) via the SpeedBox app on your smartphone. We therefore recommend that you simply connect your phone to a special Carrier for oxygen bottles to be attached to the handlebars.
Note: If you have a Shimano E-Bike without a free E-Tube connection, please choose the variant +E-Tube PortThis is usually the case with Shimano e-bikes with one of the following components:
- Satellite system ON/OFF switch
- Di2 derailleur
Tuning can be switched on and off
The SpeedBox 1.3 B.Tuning Chip is very easy to use. You can conveniently turn the tuning on and off using your bike's light button: As long as the light is off, the tuning is active and there is no longer a 25 km/h speed limit (light off = tuning active). If you turn the light on, the tuning chip is deactivated and the e-bike functions as usual with maximum motor support only up to 25 km/h (light on = tuning off).
thanks to the SpeedBox In the app, you can also use the light button independently of the tuning function. Simply activate the double-click function in the app, and you can activate or deactivate tuning by double-clicking the light button.
Installation
The SpeedBox 1.3 B.Tuning Chip simply needs to be connected to the connectors on the engine. To access the connectors, the engine cover must be removed briefly. To ensure the easiest possible connection, SpeedBox 1.3 B.Tuning Chips uses only original connectors. Unlike previous versions of the SpeedBox must the SpeedBox 1.3 plugged into the E-Tube connection of the motor.
Please note: if you SpeedBox 1.3 B.If you want to install the tuning chip in a brand new e-bike, you must first ride the e-bike for at least 1 km before activating the tuning chip for the first time.


Advantages of the SpeedBox App
- Display of correct driving data, even with active tuning (current speed, etc.).
- Set the maximum auxiliary speed (the manufacturer recommends not exceeding 35 km/h to avoid error W011). For B.Tuning models, the maximum speed can be set in the SpeedBox App adjust accordingly).
- Tuning control.
- Monitor and record driving parameters & performance.
- Individual trips can be saved and compared with friends, for example.
- The app allows you to activate the “double-click tuning control” (only works on displays with a light button).
Our advice: Before you do that SpeedBox 1.3 B.Tuning module, you should first SpeedBox Download the app to check if it's fully functional on your smartphone. Use the demo version to experience all the features the app has to offer.
SpeedBox 1.3 B.Tuning for Shimano EP8 / EP800 - Compatibility
This tuning tool is compatible with Shimano EP8 / EP800 or EP8 RS e-bike motors.
Compatible with Giant Revolt E+ e-bikes with EP8 Engines from 2022/2023.
Compatible with the SpeedBox App
Smartphone requirement: Bluetooth 4.0 or higher.
Not compatible with e-bikes with Di2 (electronic gear shifting).
Not compatible with Satellite System ON/OFF Switch (EW-SW100, EW-SW300).
Important: Only compatible with EP-8(00) - Not compatible with EP-801!
Note: If you have a Shimano E-Bike without a free E-Tube connection (e.g. with Di2 gears), please choose the variant +ETube PortThis is usually the case with Shimano e-bikes with one of the following components:
- Satellite system ON/OFF switch
- Di2 derailleur
If you have an e-bike from the Shimano E-series, you will need one of the following tuning tools:
SpeedBox 1.2 for Shimano E8000, E7000, E6100, E5000
SpeedBox 1.2 B.Tuning for Shimano E8000, E7000, E6100, E5000 (with app)
Tools
To install an E-Bike tuning chip in your E-Bike it is sometimes special tools necessary. Please check previously whether you have to open the engine compartment to access the motor connectors. This is especially true for products from the Modules, Kit, Dongle and Sensor.
Normally (but not always) opening the engine compartment requires loosening the crank. To do this, you will need a Crank puller. Some engines also have a Spider Tool This is important for opening the lock ring on the chainring - because the chainring must be loosened here so that the motor cover can be removed to access the inside of the motor. If you want to replace the chainring (wear, change the gear ratio), you often need a Spider Tool. The necessary special tools can also be found in our shop. To remove the engine cover, you usually need a Torx or Allen key. For installing the modules, appropriate Pliers from the electronics sector.
Do you decide not for a tuning solution that you have to install in the engine compartment (Box, Software), there is no need for any tools. In our Guide you will find further tips.
The EBikeTuningShop and EBikeTuningBlog We'll keep you regularly informed about the latest e-bike tuning and e-scooter tuning products and solutions. You can sign up for our free newsletter here:
warnings
Important information on tuning measures for e-bikes and e-scooters
We expressly point out that any modification to e-bikes and e-scooters – whether through hardware tuning (e.g. tuning chips, dongles, sensor adapters) or software tuning (e.g. apps, programs or USB tools) – can have consequences.
Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads as defined by the StVZO (Road Traffic Licensing Regulations). Legal use is therefore only possible on private property or - if permitted - in competitions. Riding an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license (Section 21 of the Road Traffic Act) and driving without insurance (Section 6 of the PflVG). Tuning measures on e-bikes can lead to the loss of warranty rights and manufacturer guarantees. Furthermore, tuning measures can lead to the loss of insurance coverage and benefits from accident victim assistance in the event of an accident. The e-bike (or e-scooter) modified by tuning measures is subject to additional stress due to the higher speed, which can lead to safety risks.
Delivery time, shipping costs, minimum order value and payment methods:
Delivery time:
The processing time for physical products generally begins only after payment has been receivedWithin Germany, it is usually 1-3 business daysIn exceptional cases, processing may take up to... 8 business days Extend the delivery time. Delivery times for international destinations may also vary.
Please note: A DHL shipment confirmation You will only receive this information once the shipment has been scanned for the first time at the parcel center. Only from this point onward will the shipment be trackable.
Due to high demand, ongoing incoming goods, or anticipated short-notice restocks, some products may experience longer processing times. We appreciate your understanding.
Note regarding digital products / license codes: License codes and license keys are not included in the package, but by email Shipped. Processing will only begin after payment is received. Please note that instant transfer Sofort does not automatically correspond to a direct bank credit and in individual cases it may also be the case that Credit card payments Delays may occur during payment processing. The respective license code will then be generated and sent. In some cases, this can take several hours. If you do not receive a license code, please always inform us. Order number in the format xxx-xxx-xxx mit.
Delivery area:
We deliver to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.
For customers from Switzerland: For deliveries to Switzerland we recommend here a separate service.
Shipping:
Shipping costs for Germany are €4,90; shipping is waived for orders over €180. For countries within the EU, shipping costs are €12,90; shipping is waived for orders over €2.000. We currently do not ship to countries outside the EU. We also do not ship to the USA, France, or Canada (including any overseas territories). We ask that you bear the costs of any return shipments yourself. Please note that customs duties may apply in countries outside the European Union.
Minimum order value:
The minimum order value is €25. Only above this amount are advance payment, PayPal, and bank transfer available as payment methods.
Maximum order value:
The maximum order value for orders outside the EU is €1.000. The maximum order value within the EU is €12.500.
Payment in advance via bank transfer:
Please transfer the total amount, including your order number, to our account, which was communicated to you in the confirmation email. Please note that transfers within Germany can take up to three business days. Transfers from abroad, especially from Austria, usually reach us very quickly. Transfers from other countries can take slightly longer on average.
Payment in advance via Paypal:
At the end of the ordering process, you will be redirected to the PayPal page. There you can initiate your payment. Once the PayPal transaction is complete, your order status will change in the shop. The goods will then be shipped as soon as possible.
