| EBT Unlock Key | EBTsmart Unlock Key | EBTsmart Unlock Key Switch | Mountain Tuning | Badass Box | RedPed | VOLspeed | PearTune | SpeedBox | MBIQ | sIMPLEk | Splug | |
| Discover African | License code | License code | License code + hardware | Display / Module | Box | module | module | module | module | Module / Sensor | Kit / Dongle | Dongle |
| Features | **** | ***** | ***** | ***** | * | ***** | **** | *** | *** | *** | ** | ** |
| Easy installation | ***** | ***** | *** | *** | **** | ** | ** | ** | ** | ** / * | ** / * | ** |
| Invisible after installation | ***** | ***** | **** | *** | * | ***** | ***** | ***** | ***** | ***** | **** | *** |
| Switch on / off while driving | * Browser / USB |
* Browser / USB |
*** Sensor |
***** Display |
* Essay |
***** App, Display |
***** Display |
***** Display |
***** Display / App |
*** Sensor |
**** Display / Plug |
**** Dongle |
| No more tuning module on the bike | ***** | ***** | *** | *** | ***** | * | * | * | * | * | *** | **** |
| Correct display km / km/h | ***** | ***** at 32 km/h level |
** | ***** Display |
* | ***** Display, App |
***** | ***** | **** depending on the system |
* | **** | * |
| Dethrottling | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** |
| price in euro | from 69 | from 179 | from 179 | about 99 to 219 | about 154 to 239 | about 149 to 229 | about 139 to 199 | about 139 to 349 | about 149 to 349 | about 124 to 219 | about 69 to 159 | approx. 219 |
SpeedBox 1.3 for Bafang (4-pin connector): Max Drive M300, M400, M420
AVAILABILITY: In stock
PRODUCT TYPE: Bafang
BRAND: Speedbox
You save: €30,00 (17%)
SpeedBox 1.3 for Bafang – Tuning module for 4-pin connectors
The SpeedBox 1.3 is a proven tuning solution for selected Bafang Max Drive Motors with 4-pin speed sensorThe module removes the factory-set 25 km/h speed limit, so that motor assistance is maintained even at higher speeds.
The system is operated directly via the e-bike's light button . Once installed, the tuning can be switched on and off at any time – completely without a smartphone or computer.
Important to know: With the tuning activated, the display only shows correct values up to 23 km/h . At higher speeds, only half of the actual speed is displayed.
Tip: If you are the SpeedBox and if you want to use the lighting of your e-bike at the same time, we recommend the appropriate Light cable for Bafang.
Overview of advantages
- Lifting of the 25 km/h speed limit
- Simple control via the light button
- Can be activated and deactivated at any time
- No app required
- Easy retrofitting
- Can be removed without leaving any residue
Activation and deactivation
After installation, the tuning can be conveniently switched on and off via the e-bike's light button .
- Activation: Press the light button
- Confirmation: brief appearance of the active light symbol on the display
- Deactivation: Press the light button again
When deactivated, the e-bike operates in its original, standard mode.
Display behavior during operation
Please note the special display behavior of this version:
- 23 km/h Are the values displayed correctly?
- Above 23 km/h, the display only shows... half the real speed
This behavior is inherent to the system and should be taken into account before purchasing.
Installation
The SpeedBox 1.3 is a module that connects directly to the engine. Installation can be carried out by the user with standard tools and some technical understanding.
- Switch off the e-bike and remove the battery
- Gain access to the connectors on the motor
- Disconnect the plug connection from the motor to the speed sensor.
- SpeedBox connect to the separate connectors
- Connect the remaining plug connections to the connector for the light.
- Restoring the e-bike to its original condition
- Turn on the e-bike and activate the tuning via the light button.
If necessary, the tuning chip can be removed at any time to restore the e-bike to its original condition.
Note: If the SpeedBox If a new e-bike is being installed, at least the following should be done before the first activation: 1 km It can be driven without tuning.
Compatibility
The SpeedBox 1.3 for Bafang is compatible with the following drive systems with 4-pin connector:
- Bafang Max Drive M300
- Bafang Max Drive M400
- Bafang Max Drive M420
The speed sensor connector has 4 pins. To check the number of pins, the engine cover must be removed and the speed sensor connector inspected.
This SpeedBox-Version is with CAN and UART protocol compatible.
Not compatible with:
- SpeedBox App
Who is it for SpeedBox 1.3 suitable?
This version is aimed at drivers who are looking for a simple, direct and robust tuning solution and can do without app control.
Anyone who wants to unlock their Bafang e-bike easily and accepts the special display behavior above 23 km/h will find the following solution: SpeedBox 1.3 a solid solution.
Legal notice
This product is not approved for use on public roads. It may only be used on private property or for sporting purposes. Please observe the legal regulations in your country. Use is at your own risk.
Tools
Installing an e-bike tuning chip in your e-bike may require special tools . Please check beforehand whether you need to open the motor compartment to access the motor's connectors. This applies particularly to products in the categories of modules , kits , dongles , and sensors.
Normally (but not always), opening the motor compartment requires loosening the crankset. For this, you'll need a crank puller . Some motors also require a spider tool to open the lockring on the chainring – the chainring needs to be loosened to remove the motor cover and access the motor's interior. If you want to replace the chainring (due to wear or to change the gear ratio), you'll often need a spider tool as well . You can find the necessary special tool in our shop. Finally, removing the motor cover usually requires a Torx or Allen wrench. For installing the modules, appropriate pliers from the electronics sector are suitable.
If you don't opt for a tuning solution that requires installation in the engine compartment ( such as a tuning box or software ), you won't need the necessary tools. You'll find further tips in our guide .
The EBikeTuningShop and the EBikeTuningBlog regularly inform you about the latest e-bike and e-scooter tuning products and solutions. You can subscribe to the free newsletter here:
warnings
Important information on tuning measures for e-bikes and e-scooters
We expressly point out that any modification to e-bikes and e-scooters – whether through hardware tuning (e.g. tuning chips, dongles, sensor adapters) or software tuning (e.g. apps, programs or USB tools) – can have consequences.
Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads as defined by the StVZO (Road Traffic Licensing Regulations). Legal use is therefore only possible on private property or - if permitted - in competitions. Riding an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license (Section 21 of the Road Traffic Act) and driving without insurance (Section 6 of the PflVG). Tuning measures on e-bikes can lead to the loss of warranty rights and manufacturer guarantees. Furthermore, tuning measures can lead to the loss of insurance coverage and benefits from accident victim assistance in the event of an accident. The e-bike (or e-scooter) modified by tuning measures is subject to additional stress due to the higher speed, which can lead to safety risks.
Delivery time, shipping costs, minimum order value and payment methods:
Delivery time:
The processing time for physical products generally only begins after payment has been received . Within Germany, it usually takes 1–3 business days . In exceptional cases, processing may take up to 8 business days . Delivery times to other countries may vary.
Please note: You will only receive a DHL shipment confirmation once the shipment has been scanned for the first time at the parcel center. Only from this point onward will the shipment be trackable.
Due to high demand, ongoing incoming goods, or anticipated short-notice restocks, some products may experience longer processing times. We appreciate your understanding.
Note regarding digital products/license codes: License codes and license keys are not sent by mail, but by email . Processing begins only after payment has been received. Please note that instant bank transfers do not automatically result in a direct bank credit, and in some cases, credit card payments may also experience delays in payment reconciliation. The respective license code will then be generated and sent. This may take several hours in some cases. If you do not receive a license code, please always provide us with the order number in the format xxx-xxx-xxx.
Delivery area:
We deliver to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.
For customers from Switzerland: For deliveries to Switzerland, we recommend a separate service.
Shipping:
Shipping costs for Germany are €4,90; shipping is waived for orders over €180. For countries within the EU, shipping costs are €12,90; shipping is waived for orders over €2.000. We currently do not ship to countries outside the EU. We also do not ship to the USA, France, or Canada (including any overseas territories). We ask that you bear the costs of any return shipments yourself. Please note that customs duties may apply in countries outside the European Union.
Minimum order value:
The minimum order value is €25. Only above this amount are advance payment, PayPal, and bank transfer available as payment methods.
Maximum order value:
The maximum order value for orders outside the EU is €1.000. The maximum order value within the EU is €12.500.
Payment in advance via bank transfer:
Please transfer the total amount, including your order number, to our account, which was communicated to you in the confirmation email. Please note that transfers within Germany can take up to three business days. Transfers from abroad, especially from Austria, usually reach us very quickly. Transfers from other countries can take slightly longer on average.
Payment in advance via Paypal:
At the end of the ordering process, you will be redirected to the PayPal page. There you can initiate your payment. Once the PayPal transaction is complete, your order status will change in the shop. The goods will then be shipped as soon as possible.
