SpeedBox 3.0 for OLI
AVAILABILITY: In stock
PRODUCT TYPE: OLI
BRAND: speed box
You save: €20,00 (12%)
SpeedBox 3.0 for OLI
A third generation tuning chip that exceeds the 25 km/h speed limit of OLI Sport e-bikes have a completely new speed limit. This allows for much faster riding with full motor support. The e-bike display shows real-life values. What's particularly interesting is that you can even set the speed limit to your desired level.
The SpeedBox 3.0 is a chip or module that can be easily connected to the motor.
SpeedBox 3.0 for OLI – Advantages at a glance
No more speed limit
The SpeedBox 3.0 Tuning Chip lifts the 25 km/h speed limit of OLI E-bike drives so that (theoretically) unlimited speeds can be achieved with full motor support.
Real values in the e-bike display
Even with active tuning, the e-bike display shows real data such as top speed, average speed, range and daily distance.
Tuning can be switched on and off
You can turn the tuning on and off using the buttons on the display. Briefly pressing the WALK button activates the tuning. To confirm that the speed limit has been lifted, the display briefly shows 9,9 km/h.
If you want to turn the tuning off again, simply press the WALK button briefly again. To confirm that the tuning has been canceled, the display will briefly show 2,5 km/h. Now the assisted speed will end again, as usual, at 25 km/h – and the e-bike will then function normally again.
Another way to enable/disable tuning is the key combination ↓ ↑ ↓ ↑.
Freely set speed limit
Within the SpeedBox 3.0 for OLI There is the option to set the maximum assisted speed to a desired value. This works by switching the modes three levels down and then three levels up (---+++). A displayed speed of 1,5 km/h corresponds to a maximum speed of 15 km/h, 2,0 corresponds to a maximum speed of 20 km/h, 2,5 corresponds to a maximum speed of 25 km/h, 3,0 corresponds to a maximum speed of 30 km/h, etc. You can change the maximum speed by briefly pressing the WALK button or turning the rear wheel 360°. The last displayed speed limit is automatically saved after 5 seconds of inactivity.
Installation
You must SpeedBox Simply connect the 3.0 chip to the connectors on the motor (connectors on the cable from the motor to the speed sensor and from the motor to the display). To do this, you will need to temporarily remove all components of the e-bike so that you can access the corresponding connectors.
To simplify installation, SpeedBox Colored plugs equipped with a key for correct connection.
If you want to return the e-bike to its original condition, you can remove the chip at any time.
This installation video shows you how to SpeedBox 3.0 chip you need to install:
Important note:
if you SpeedBox If you want to install the chip in a brand new e-bike, you must first ride the bike for at least 1 km before switching on the tuning chip for the first time.
SpeedBox 3.0 for OLI - Compatibility
Compatible with OLI Sport E-bike motors.
NOT compatible with OLI Sport Plus Engines!
NOT compatible with OLI Edge engines.
Not compatible with the SpeedBox App
Comparison of e-bike tuning products:
| JUM-Ped | Mountain Tuning | Badass Box | RedPed | VOLspeed | PearTune | SpeedBox | MBIQ | sIMPLEk | Sx2 dongle | |
| Art | Software |
Software |
Box | module | module | module | module |
module / Sensor |
module / Dongle |
Dongle |
| Features | ***** | ***** | * | ***** | **** | *** | *** | *** | *** / ** | * |
| Easy installation | ***** | ***** | **** | ** | ** | ** | ** | ** / * | ** / * | * |
| Invisible after installation | ***** | ***** | * | ***** | ***** | ***** | ***** | ***** | ***** / **** | **** |
| Switch on / off while driving |
* Gerät |
***** Gerät, Display |
* Essay |
***** App, Display |
***** Display |
***** Display |
***** (App), Display |
*** Display, Magnet |
***** / **** Display / Plug |
**** Plug |
| No more tuning on the bike | ***** | ***** | ***** | * | * | * | * | * | * / **** | **** |
| Invisible dismantling | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** / *** | *** |
| Easy dismantling | ***** | ***** | ***** | ** | ** | ** | ** | ** / * | ** / * | * |
| Display correct km/h |
***** Display |
***** Display |
* |
***** Display, App |
***** Display |
***** Display |
***** Display, App |
* |
**** Display |
* |
| Dethrottling | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** |
| Thrushes | * | ***** | * | ***** | ***** | ***** | ***** | * | * | * |
| price in euro |
169 to 249 |
189 – 349 | 139 – 164 |
219 to 239 |
159 – 219 |
139 to 259 |
139 to 349 |
89 to 199 |
89 to 219 |
139 to 159 |
Tools
To install an E-Bike tuning chip in your E-Bike it is sometimes special tools necessary. Please check previously whether you have to open the engine compartment to access the motor connectors. This is especially true for products from the Modules, Kit, Dongle and Sensor.
Normally (but not always) opening the engine compartment requires loosening the crank. To do this, you will need a Crank puller. Some engines also have a Spider Tool This is important for opening the lock ring on the chainring - because the chainring must be loosened here so that the motor cover can be removed to access the inside of the motor. If you want to replace the chainring (wear, change the gear ratio), you often need a Spider Tool. The necessary special tools can also be found in our shop. To remove the engine cover, you usually need a Torx or Allen key. For installing the modules, appropriate Pliers from the electronics sector.
Do you decide not for a tuning solution that you have to install in the engine compartment (Box, Software), there is no need for any tools. In our Guide you will find further tips.
The EBikeTuningShop and the EBikeTuningBlog We'll keep you regularly informed about the latest e-bike tuning and e-scooter tuning products and solutions. You can sign up for our free newsletter here:
warnings
Important information on tuning measures for e-bikes and e-scooters
We expressly point out that any modification to e-bikes and e-scooters – whether through hardware tuning (e.g. tuning chips, dongles, sensor adapters) or software tuning (e.g. apps, programs or USB tools) – can have consequences.
Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads as defined by the StVZO (Road Traffic Licensing Regulations). Legal use is therefore only possible on private property or - if permitted - in competitions. Riding an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license (Section 21 of the Road Traffic Act) and driving without insurance (Section 6 of the PflVG). Tuning measures on e-bikes can lead to the loss of warranty rights and manufacturer guarantees. Furthermore, tuning measures can lead to the loss of insurance coverage and benefits from accident victim assistance in the event of an accident. The e-bike (or e-scooter) modified by tuning measures is subject to additional stress due to the higher speed, which can lead to safety risks.
Delivery time, shipping costs, minimum order value and payment methods:
Delivery time:
Delivery takes 1-3 business days within Germany. In exceptional cases, it can take up to 8 business days. Delivery times outside Germany may take longer. Please understand that due to high demand, some products may experience longer delivery times.
Delivery area:
We deliver to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.
For customers from Switzerland: For deliveries to Switzerland we recommend here a separate service.
Shipping:
Shipping costs for Germany are €4,90; shipping is waived for orders over €180. For countries within the EU, shipping costs are €12,90; shipping is waived for orders over €2.000. We currently do not ship to countries outside the EU. We also do not ship to the USA, France, or Canada (including any overseas territories). We ask that you bear the costs of any return shipments yourself. Please note that customs duties may apply in countries outside the European Union.
Minimum order value:
The minimum order value is €25. Only above this amount are advance payment, PayPal, and bank transfer available as payment methods.
Maximum order value:
The maximum order value for orders outside the EU is €1.000. The maximum order value within the EU is €12.500.
Payment in advance via bank transfer:
Please transfer the total amount, including your order number, to our account, which was communicated to you in the confirmation email. Please note that transfers within Germany can take up to three business days. Transfers from abroad, especially from Austria, usually reach us very quickly. Transfers from other countries can take slightly longer on average.
Payment in advance via Paypal:
At the end of the ordering process, you will be redirected to the PayPal page. There you can initiate your payment. Once the PayPal transaction is complete, your order status will change in the shop. The goods will then be shipped as soon as possible.
