New
-30%
Pre-order
Sold Out

SpeedBox 3.0 B.Tuning for Bosch

AVAILABILITY: In stock

PRODUCT TYPE: Bosch Gen2, Bosch Gen3, Bosch Gen4

BRAND: speed box

€ 309,00€ 219,00

You save: €90,00 (30%)

teacher
master
paypal
visa
apple_pay
google_pay
PRODUCT INFORMATION
Comparison
Tools
Reviews
warnings
Payment & Shipping
PRODUCT INFORMATION

SpeedBox 3.0 B.Tuning for Bosch

The SpeedBox 3.0 doesn't just remove the 25 km/h speed limit on Bosch e-bikes—it even lets you set the maximum speed to a custom value. This tuning chip isn't just compatible with Bosch Active-, Performance- and CX-Line motors, but also with the new Bosch 2020 drives including anti-tuning software. This tool gives you the opportunity to use the full power of your motor. SpeedBox 3.0 B.Tuning is compatible with the SpeedBox App, which allows you to benefit from numerous attractive additional features. You can also monitor and save all parameters of your ride on your phone display.

Another benefit of the SpeedBox 3.0 is that even when tuning is active, the correct data is shown on the e-bike display (current speed, etc.). Furthermore, tuning can be switched on or off at any time - either via the app or with the Walk button. After pressing the WALK button, 9.9 km/h (6.2 mph) appears briefly on the display - this signals that tuning has been switched on. The 25 km/h speed limit is now lifted. If you press the WALK button again, tuning is deactivated and the value 2.5 km/h (1.6 mph) is briefly displayed as confirmation. The e-bike now functions as it did in its original state and the motor support only goes up to 25 km/h, as usual.

For owners of Bosch e-bikes without a WALK button, there is the option to SpeedBox can also be switched on and off using the key combination -+-+.

Attention: If you need a crank puller to open the engine, you can purchase this module to get a crank puller at an extra low price in a special offer here buy with it.

Set your own maximum speed


Setting the maximum speed is easy: First, enter the following code using the control buttons: Turbo - EMTB - Tour - Eco - Tour - EMTB - Turbo. The current speed limit will then be displayed. You can now change the maximum speed – either by briefly pressing the WALK button or by rotating the rear wheel 360°. A displayed value of 1.5 km/h would then correspond to a top speed of 15 km/h, a value of 2.0 km/h would correspond to 20 km/h, 9.9 km/h would correspond to unlimited speed, etc. After 5 seconds of inactivity, the last setting will be adopted. That's it – the maximum assisted speed has been saved and you can start!

Please note: If you SpeedBox 3.0 for 4th-generation Bosch e-bike motors (models from 2020 or later), you must leave the e-bike switched on after the end of your ride until a value of 0,0 km/h appears on the display. During this process, the remaining time is displayed in minutes. After that, you can safely switch off your e-bike and look forward to your next trip.

SpeedBox App

The free SpeedBox App was specially developed for SpeedBox B. Tuning tools. The connection between the smartphone and the tuning chip is established via Bluetooth. Using the practical app, you can display numerous useful data and trip parameters. You also have the option to save routes driven and share them with friends.


Here are the most important features of the app at a glance:

Tuning control: Turn tuning on or off.

“Invisible mode”: In this mode, tuning can no longer be activated via the WALK button, but only via the app.

Block motor: You can temporarily switch off the motor of your e-bike via the app to protect the bike from unauthorized access.

Save ride data: Save your trip data to monitor your performance. The data can also be shared with friends.

Display technical data on your smartphone, e.g.: current speed, average and maximum speed, distance, ride time, total distance, cadence, battery level, range, torque & energy consumption (of rider and motor), etc.

Access to the app is secured by an individually defined PIN and a personal password.

Important NOTE: Of the SpeedBox 3.0 B.Tuning Chip can also be used without the app. However, with the app you benefit from numerous interesting additional features such as the option to Performance to always keep a close eye on the situation. SpeedBox Because the app gets the data directly from the e-bike's control unit, the data is also much more accurate than with many conventional sports apps.


Mounting


Thanks to color-coded plug connections, the installation of the SpeedBox 3.0 tuning chips is quite simple. Basically, you just need to gain access to the engine and then disconnect the connectors on the cable from the engine to the speed sensor and from the engine to the display. Then the SpeedBox connected to the separate connectors. If necessary, the tuning tool can be removed at any time to restore the e-bike to its original condition.

Note: If you the SpeedBox on a brand new e-bike, you should ride the bike for at least 10 km before using the tuning chip for the first time.

SpeedBox 3.0 B.Tuning for Bosch – Benefits at a glance

Compatible with the new Bosch 2020 drives (Bosch Gen 4).

The 25 km/h speed limit will be completely lifted.

Maximum speed can be set to an individual value (the actual achievable maximum speed depends on factors such as cadence).

Correct values ​​in the e-bike display.

User-friendly and easy to install.

The tuning tool can be easily removed if necessary.

Tuning can be switched on and off (via app, WALK button or combination +-+-).

Compatible with free SpeedBox App that offers numerous interesting additional functions (see above).

SpeedBox 3.0 B.Tuning for Bosch – Compatibility

Bosch Active Line, Active Line Plus, Performance Line, Performance Line CX, Performance Line Speed, Cargo Line. Also compatible with Bosch 4th generation engines (model year 2020/2021). SpeedBox 3.0 B.Tuning is NOT compatible with Bosch Classic Line.

Not compatible with Bosch Smart System 2022 (BES3).

Compatible with the following displays:

Intuvia, Purion, Nyon, Kiox, Cobi.



Please note:

-If you have the SpeedBox 3.0 into a brand new Bosch e-bike, you must ride the bike for at least 10 km before you can SpeedBox turn it on for the first time.

-When using the SpeedBox 3.0 in 4th-generation Bosch motors (model year 2020 and later), the e-bike must remain switched on after the end of the ride until the display shows a constant speed of 0,0 km/h. This prevents detection by the Bosch Anti-Tuning software.

-It is recommended not to perform Bosch updates. Tuning may no longer function properly afterward.

IMPORTANT: Almost all Bosch e-bikes from 2022/23 are equipped with the Smart System drive. Bosch Smart You can recognize System E-Bikes by the following features:

The e-bike is equipped with Kiox 300, Intuvia 100 or Purion 200 displays.

The e-bike is equipped with the control units LED Remote, Mini Remote or System Controller.

The e-bike is compatible with the Bosch eBike Flow app.

Suitable tuning tools for Bosch Smart You can find System E-Bikes in our shop.

SpeedBox 3.0 B.Tuning is manufactured in the Czech Republic.

Tip: Bosch Smart System E-Bikes (BES3) can also be easily identified by the plug on the charging cable.

SQUARE plug = Bosch Smart System BES3 (Gen4) + Bosch Gen5:

ROUND plug = Bosch Gen2, Gen3 & Gen4:

Does your Bosch e-bike have a round plug (as shown here), you have the correct Tuning module selected. If your Bosch e-bike does not have either of these plugs, you either do NOT have a Bosch e-bike, or you have an e-bike with the old Gen1 drive (Classic Line).

Comparison

Comparison of e-bike tuning products:

  JUM-Ped Mountain Tuning Badass Box RedPed VOLspeed PearTune SpeedBox MBIQ sIMPLEk Sx2 dongle
Art Software (module)


Software


(Dongle)
Box module module module module (Kit)


module /
Sensor
(Kit)


module /


Dongle
Dongle
Features ***** ***** * ***** **** *** *** *** *** / ** *
Easy installation ***** ***** **** ** ** ** ** ** / * ** / * *
Invisible after installation ***** ***** * ***** ***** ***** ***** ***** ***** / **** ****
Switch on / off while driving *


Gerät
*****


Gerät, Display
*


Essay
*****


App, Display
*****


Display
*****


Display
*****


(App), Display
***


Display, Magnet
***** / ****


Display /


Plug
****


Plug
No more tuning on the bike ***** ***** ***** * * * * * * / **** ****
Invisible dismantling ***** ***** ***** ***** ***** ***** ***** ***** ***** / *** ***
Easy dismantling ***** ***** ***** ** ** ** ** ** / * ** / * *
Display correct km/h *****


Display
*****


Display
* *****


Display, App
*****


Display
*****


Display
*****


Display, App
* ****


Display
*
Dethrottling ***** ***** ***** ***** ***** ***** ***** ***** ***** *****
Thrushes * ***** * ***** ***** ***** ***** * * *
price in euro 169 to


249
189 – 349 139 – 164 219 to


239
159 – 219 139 to


259
139 to


349
89 to


199
89 to


219
139 to


159

Legend

Tools

Tools

To install an E-Bike tuning chip in your E-Bike it is sometimes special tools necessary. Please check previously whether you have to open the engine compartment to access the motor connectors. This is especially true for products from the Modules, Kit, Dongle and Sensor

Normally (but not always) opening the engine compartment requires loosening the crank. To do this, you will need a Crank pullerSome engines also have a Spider Tool This is important for opening the lock ring on the chainring - because the chainring must be loosened here so that the motor cover can be removed to access the inside of the motor. If you want to replace the chainring (wear, change the gear ratio), you often need a Spider Tool. The necessary special tools can also be found in our shop. To remove the engine cover, you usually need a Torx or Allen key. For installing the modules, appropriate Pliers from the electronics sector.

Do you decide not for a tuning solution that you have to install in the engine compartment (Box, Software), there is no need for any tools. In our Guide you will find further tips.

Reviews

The EBikeTuningShop and the EBikeTuningBlog We'll keep you regularly informed about the latest e-bike tuning and e-scooter tuning products and solutions. You can sign up for our free newsletter here:  

Yes, I have read and agree to the privacy policy. 

Data protection information: Our free newsletter regularly informs you via email about interesting topics related to e-bike tuning and provides you with news about current market developments. The data you enter here will only be used to personalize the newsletter and will not be passed on to third parties. You can unsubscribe from the newsletter at any time. sign out or revoke your consent at any time by sending an email to newsletter@ebiketuning.com. Further information on data protection can be found in our PrivacyBy submitting your entered data, you agree to receive the newsletter and confirm the privacy policy.

* = necessary information

warnings

warnings

Important information on tuning measures for e-bikes and e-scooters

We expressly point out that any modification to e-bikes and e-scooters – whether through hardware tuning (e.g. tuning chips, dongles, sensor adapters) or software tuning (e.g. apps, programs or USB tools) – can have consequences.

Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads as defined by the StVZO (Road Traffic Licensing Regulations). Legal use is therefore only possible on private property or - if permitted - in competitions. Riding an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license (Section 21 of the Road Traffic Act) and driving without insurance (Section 6 of the PflVG). Tuning measures on e-bikes can lead to the loss of warranty rights and manufacturer guarantees. Furthermore, tuning measures can lead to the loss of insurance coverage and benefits from accident victim assistance in the event of an accident. The e-bike (or e-scooter) modified by tuning measures is subject to additional stress due to the higher speed, which can lead to safety risks.

Payment & Shipping

Delivery time, shipping costs, minimum order value and payment methods:

Delivery time:

Delivery takes 1-3 business days within Germany. In exceptional cases, it can take up to 8 business days. Delivery times outside Germany may take longer. Please understand that due to high demand, some products may experience longer delivery times.

Delivery area:

We deliver to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.

For customers from Switzerland: For deliveries to Switzerland we recommend here a separate service. 

Shipping:

Shipping costs for Germany are €4,90; shipping is waived for orders over €180. For countries within the EU, shipping costs are €12,90; shipping is waived for orders over €2.000. We currently do not ship to countries outside the EU. We also do not ship to the USA, France, or Canada (including any overseas territories). We ask that you bear the costs of any return shipments yourself. Please note that customs duties may apply in countries outside the European Union. 

Minimum order value:

The minimum order value is €25. Only above this amount are advance payment, PayPal, and bank transfer available as payment methods.

Maximum order value:

The maximum order value for orders outside the EU is €1.000. The maximum order value within the EU is €12.500.

Payment in advance via bank transfer:

Please transfer the total amount, including your order number, to our account, which was communicated to you in the confirmation email. Please note that transfers within Germany can take up to three business days. Transfers from abroad, especially from Austria, usually reach us very quickly. Transfers from other countries can take slightly longer on average.

Payment in advance via Paypal:

At the end of the ordering process, you will be redirected to the PayPal page. There you can initiate your payment. Once the PayPal transaction is complete, your order status will change in the shop. The goods will then be shipped as soon as possible.

SpeedBox 3.0 B.Tuning for Bosch

SpeedBox 3.0 B.Tuning for Bosch

€ 309,00€ 219,00
The preloader