SpeedBox 3.0 B.Tuning for OLI
AVAILABILITY: In stock
PRODUCT TYPE: OLI
BRAND: speed box
You save: €50,00 (18%)
SpeedBox 3.0 B.Tuning for OLI
With this tuning chip you can increase the 25 km/h speed limit of your OLI Sport e-bikes can be completely removed. There's also the option to set the maximum speed to a custom value. This allows the tuning to be perfectly tailored to your personal needs. Even when tuning is enabled, the e-bike display will show the correct values.
In contrast to the “normal” SpeedBox 3.0 for OLI This variant (“B.Tuning”) is also available with the SpeedBox App compatibility offers additional benefits. For example, you can monitor your performance, control tuning, and save driving data. The connection between the app and the tuning chip is wireless via Bluetooth.
This is the SpeedBox 3.0 B.Tuning is a module or a chip that simply needs to be connected to the connectors on the motor.
SpeedBox 3.0 B.Tuning for OLI – Advantages at a glance
Speed limit is lifted
The SpeedBox 3.0 Tuning Chip completely removes the 25 km/h speed limit, allowing you to (theoretically) ride at unlimited speeds with full motor support. This means you can finally unlock the full potential of your OLI Use e-bike motors.
E-bike display shows real values
Even when the tuning chip is switched on, the e-bike display shows correct data (e.g. maximum and average speed, range, daily distance…).
The tuning chip can be switched on and off
In contrast to some other tuning tools that are always active after switching on the e-bike, the SpeedBox 3.0 B.Tuning Chip can be switched on and off as desired – via the SpeedBox App or via the control buttons on the display. Briefly pressing the WALK button activates the tuning chip. To confirm that the speed limit has been lifted, the display briefly shows 9,9 km/h. There is then no longer a speed limit. Briefly pressing the WALK button again deactivates the chip. The display briefly shows 2,5 km/h – this confirms that the tuning has been lifted and the maximum speed is once again limited to 25 km/h. The e-bike then functions normally – as if no tuning chip were installed at all.
Should be yours OLI If your e-bike does not have a WALK button, you can also activate and deactivate the tuning using the key combination ↓ ↑ ↓ ↑.
Maximum speed freely adjustable
You can freely adjust the maximum assistance speed. To do this, switch the modes down three steps and then up three steps. The display will then show the current maximum speed (a value of 2.0 corresponds to 20 km/h, 2.5 corresponds to 25 km/h, 3.0 stands for 30 km/h, etc.). Confirm the selected speed with the WALK button. If the WALK function on your e-bike is not activated, you can also change the setting by turning the rear wheel. In this case, the last displayed value is saved after five seconds of inactivity.
Advantages of the SpeedBox App
thanks to the SpeedBox The app always gives you the best possible overview of your performance. But the app can do even more:
- Control of the tuning chip (tuning on and off etc.).
- The smartphone display shows many current data and riding parameters - e.g. speed data, distance, cadence, range, battery data, energy & power (human / motor), torque, etc.
- Engine diagnostics.
- Individual trips can be saved and compared with friends, for example.
- Possibility to hide the tuning (in this case the tuning can no longer be switched on and off using the e-bike's control buttons).
- Personal PIN protects the app from unauthorized access.
- Activate motor lock.
The app can be downloaded for free from Google Play or the App Store. SpeedBox The app is not required to use the tuning chip, but it is a useful accessory.
Tip: We recommend that you check the SpeedBox 3.0 B.Tuning Chips, first download the app for free. You can then use the demo function to check whether the app runs correctly on your phone (required smartphone: Bluetooth 4.0 or higher).
Installation
The SpeedBox 3.0 is a module or chip that must be connected to the connectors on the motor—more precisely, to the connectors on the cable from the motor to the speed sensor and from the motor to the display. To simplify installation, SpeedBox Color-coded connectors equipped with a key for correct connection. The tuning chip does not require its own battery.
You can SpeedBox 3.0 chip can be removed at any time to return the e-bike to its original state.
Please note: If you SpeedBox 3.0 B.Tuning Chip to a brand new e-bike, you must first ride the bike for at least 1 km before activating the chip for the first time.
SpeedBox 3.0 B.Tuning for OLI - Compatibility
Compatible with OLI Sport E-bike motors.
NOT compatible with OLI Sport Plus Engines!
NOT compatible with OLI Edge engines.
Compatible with the SpeedBox App (smartphone requirement: Bluetooth 4.0 or higher).
Comparison of e-bike tuning products:
| JUM-Ped | Mountain Tuning | Badass Box | RedPed | VOLspeed | PearTune | SpeedBox | MBIQ | sIMPLEk | Sx2 dongle | |
| Art | Software |
Software |
Box | module | module | module | module |
module / Sensor |
module / Dongle |
Dongle |
| Features | ***** | ***** | * | ***** | **** | *** | *** | *** | *** / ** | * |
| Easy installation | ***** | ***** | **** | ** | ** | ** | ** | ** / * | ** / * | * |
| Invisible after installation | ***** | ***** | * | ***** | ***** | ***** | ***** | ***** | ***** / **** | **** |
| Switch on / off while driving |
* Gerät |
***** Gerät, Display |
* Essay |
***** App, Display |
***** Display |
***** Display |
***** (App), Display |
*** Display, Magnet |
***** / **** Display / Plug |
**** Plug |
| No more tuning on the bike | ***** | ***** | ***** | * | * | * | * | * | * / **** | **** |
| Invisible dismantling | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** / *** | *** |
| Easy dismantling | ***** | ***** | ***** | ** | ** | ** | ** | ** / * | ** / * | * |
| Display correct km/h |
***** Display |
***** Display |
* |
***** Display, App |
***** Display |
***** Display |
***** Display, App |
* |
**** Display |
* |
| Dethrottling | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** | ***** |
| Thrushes | * | ***** | * | ***** | ***** | ***** | ***** | * | * | * |
| price in euro |
169 to 249 |
189 – 349 | 139 – 164 |
219 to 239 |
159 – 219 |
139 to 259 |
139 to 349 |
89 to 199 |
89 to 219 |
139 to 159 |
Tools
To install an E-Bike tuning chip in your E-Bike it is sometimes special tools necessary. Please check previously whether you have to open the engine compartment to access the motor connectors. This is especially true for products from the Modules, Kit, Dongle and Sensor.
Normally (but not always) opening the engine compartment requires loosening the crank. To do this, you will need a Crank puller. Some engines also have a Spider Tool This is important for opening the lock ring on the chainring - because the chainring must be loosened here so that the motor cover can be removed to access the inside of the motor. If you want to replace the chainring (wear, change the gear ratio), you often need a Spider Tool. The necessary special tools can also be found in our shop. To remove the engine cover, you usually need a Torx or Allen key. For installing the modules, appropriate Pliers from the electronics sector.
Do you decide not for a tuning solution that you have to install in the engine compartment (Box, Software), there is no need for any tools. In our Guide you will find further tips.
The EBikeTuningShop and the EBikeTuningBlog We'll keep you regularly informed about the latest e-bike tuning and e-scooter tuning products and solutions. You can sign up for our free newsletter here:
warnings
Important information on tuning measures for e-bikes and e-scooters
We expressly point out that any modification to e-bikes and e-scooters – whether through hardware tuning (e.g. tuning chips, dongles, sensor adapters) or software tuning (e.g. apps, programs or USB tools) – can have consequences.
Tuning measures on e-bikes and e-scooters mean that they are no longer permitted for use on public roads as defined by the StVZO (Road Traffic Licensing Regulations). Legal use is therefore only possible on private property or - if permitted - in competitions. Riding an e-bike or e-scooter modified by tuning measures on public roads can lead to criminal liability for driving without a license (Section 21 of the Road Traffic Act) and driving without insurance (Section 6 of the PflVG). Tuning measures on e-bikes can lead to the loss of warranty rights and manufacturer guarantees. Furthermore, tuning measures can lead to the loss of insurance coverage and benefits from accident victim assistance in the event of an accident. The e-bike (or e-scooter) modified by tuning measures is subject to additional stress due to the higher speed, which can lead to safety risks.
Delivery time, shipping costs, minimum order value and payment methods:
Delivery time:
Delivery takes 1-3 business days within Germany. In exceptional cases, it can take up to 8 business days. Delivery times outside Germany may take longer. Please understand that due to high demand, some products may experience longer delivery times.
Delivery area:
We deliver to Belgium, Bulgaria, Denmark, Estonia, Finland, Germany, Greece, Ireland, Iceland, Italy, Croatia, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland, Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic, Hungary, Cyprus.
For customers from Switzerland: For deliveries to Switzerland we recommend here a separate service.
Shipping:
Shipping costs for Germany are €4,90; shipping is waived for orders over €180. For countries within the EU, shipping costs are €12,90; shipping is waived for orders over €2.000. We currently do not ship to countries outside the EU. We also do not ship to the USA, France, or Canada (including any overseas territories). We ask that you bear the costs of any return shipments yourself. Please note that customs duties may apply in countries outside the European Union.
Minimum order value:
The minimum order value is €25. Only above this amount are advance payment, PayPal, and bank transfer available as payment methods.
Maximum order value:
The maximum order value for orders outside the EU is €1.000. The maximum order value within the EU is €12.500.
Payment in advance via bank transfer:
Please transfer the total amount, including your order number, to our account, which was communicated to you in the confirmation email. Please note that transfers within Germany can take up to three business days. Transfers from abroad, especially from Austria, usually reach us very quickly. Transfers from other countries can take slightly longer on average.
Payment in advance via Paypal:
At the end of the ordering process, you will be redirected to the PayPal page. There you can initiate your payment. Once the PayPal transaction is complete, your order status will change in the shop. The goods will then be shipped as soon as possible.
