SpeedMaster V4 Air3: Xiaomi Pure Air 3 tuning from EdisonEvo

SpeedMaster V4 Air3: Xiaomi Pure Air 3 tuning from EdisonEvo

Tuning for Xiaomi Pure Air 3 e-scooter – give your scooter more power and even more speed!

With this innovative tuning kit, you can optimize your Xiaomi Pure Air 3 e-scooter in a variety of ways (also compatible with the "Air 3 Pro" and "Pro+" variants). The main focus is on removing the speed limit, allowing you to ride much faster than before – up to 40 km/h! You can also give the drive more power, allowing you to accelerate more powerfully and tackle inclines even more easily.

Conventional tuning chips or modules can't compete in any way. This is because the SpeedMaster Air 3 is a complete conversion kit, requiring the e-scooter's controller and display to be replaced with completely new, much more powerful components.

This allows the potential of the Xiaomi Air 3 engine to be fully exploited for the first time.

The tuning settings can be easily controlled via the practical SpeedMaster 365 App (Google Play, soon also iOS).

Advantages of the SpeedMaster V4 Air3 Tuning Kit:

-Speed ​​limit is completely lifted, Speeds of up to 40 km/h or more can be achieved (of course always depending on external factors such as load, gradient, etc.).

-Increase in engine power: up to 30 percent more power & speed.

-Better climbing ability.

-Desired Maximum speed is adjustable If desired, the top speed can be reduced to 25 km/h or the legal 20 km/h within seconds, either manually or via app.

-Easy activation: The SpeedMaster Tuning can be switched on and off at any time via the app or using the controls on the e-scooter (hold down the power button and brake for 2 seconds).

-The display shows correct values, even with active tuning (current speed, etc.). It is important that the wheel diameter and the number of (motor) poles are entered correctly; otherwise, slight deviations may occur.

-Cruise Control: When Cruise Control is activated, the e-scooter maintains its current speed after 10 seconds of constant acceleration. This makes riding on long, steady distances much more comfortable. Cruise control deactivates immediately when you apply the brake or accelerator.

-Individual password: By entering a four-digit password, you can prevent unauthorized access to the tuning modes. You can even set an additional password for a second user.

-Non-Zero Start: In the optionally adjustable Non-Zero Start mode, the e-scooter can be started like a “kick scooter” – i.e. with one foot on the footboard while the other foot pushes off.

-Conversion can be carried out by yourself: When installing the Speedmaster Tuning Kit, the old controller and display must be replaced with new, stronger components. All necessary components, cables, and connectors are included. nothing soldered so you can do the conversion yourself. All you need is a little time and a little technical skill. See installation videos below.

The tuning kit can be uninstalled at any time if you ever want to restore the scooter to its original condition. Please remember to keep the old controller and the original display.

-Configurable via the SpeedMaster 365 App (Google Play, soon also iOS). 

Important note: If you want to achieve the strongest output power and the highest possible speed, you must first set the correct parameters via the APP (e.g. wheel diameter, number of motor poles, tire pressure, battery power).

Compatible with

-Xiaomi Pure Air 3 E-Scooter (also referred to as “Xiaomi Electric Scooter Pure Air 3”)

-Xiaomi Pure Air 3 Pro E-Scooter

-Xiaomi Pure Air 3 Pro+ (Plus) E-scooters

-Xiaomi Pure Air 4 electric scooter

-Xiaomi Pure Air 4 Pro E-Scooter

Important hints:

-Please note that you are only allowed to ride a tuned e-scooter on private property and in areas outside of the road traffic regulations.

-"Set Battery Type" / "Battery Numbers"Note: Depending on the battery's specifications, it's possible to switch between 10 and 12 cell rows. When determining the number of cell rows, refer to the manufacturer's specifications (if in doubt, consult the battery manufacturer). An incorrect specification could affect the battery's lifespan or lead to other errors.

-Polar logarithm: The motor has magnets that must be synchronized with the motor controller to function properly. By default, there are 14 magnet pairs and 28 polarities, but this can vary depending on the motor type. Most models are compatible with this default setting, so you generally don't need to change it. However, if you change the number of magnets or polarities, you will also need to change the motor controller settings (refer to the user manual for more information).

-Self-learning function: Through the automated self-learning process, the SpeedMaster 365 controller determines the motor parameters of your e-scooter. Important: This process must be performed during the first use of the SpeedMaster!

Proceed as follows:

• Make sure the e-scooter is turned off. Make sure the scooter is on a flat, stable surface.
• Press and hold the power button for about 10 seconds.
• The drive wheel starts to rotate slowly for a few seconds and then stops automatically.
• The wheel then rotates slowly in the opposite direction for a few seconds and then stops automatically.
• A beep indicates that the self-learning process is complete.
• If you have any questions, please contact the manufacturer of your e-scooter.